Shopping.co.uk

Park Tool Chain Lube - CL-1.2

Not AvailablePark Tool Chain Lube - CL-1.2

Reformulated with all PTFE ingredients removed, the Park Tool CL-1.2 retains the all-round perform...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Park Tool CL-1.2 is a synthetic blend chain lube designed for cyclists who want reliable performance with an environmentally conscious formulation. Its key benefit is reducing friction and protecting your chain from rust and corrosion for extended component life. While it's a great all-rounder, it may not outperform specialized lubes in extremely wet or dusty conditions. It effectively penetrates chain links, displaces moisture, and offers dependable lubrication for everyday riding.

All features

Model Part NumberCL-1.2
BrandPark Tool

Extended Product Information

FAQs

Is the Park Tool CL-1.2 suitable for all weather conditions?

The CL-1.2 is an excellent all-round lubricant for everyday use. While it offers good protection, it may not outperform highly specialized lubes in extremely wet or very dusty conditions. For such extremes, consider a lube specifically designed for those environments.

How often should I apply Park Tool CL-1.2?

This depends on your riding conditions. For dry, moderate conditions, reapplication every 100-150 miles is often sufficient. After riding in rain or mud, it's best to clean and reapply immediately.

Can I use this on my gears as well as the chain?

CL-1.2 is specifically designed for the bicycle chain. While it may get onto derailleur components during application, its primary function and formulation are for the chain itself.

What does 'PTFE-free' mean for the performance?

PTFE is a common lubricant additive. The CL-1.2 has been reformulated without it to be more environmentally friendly. It still provides excellent lubrication, friction reduction, and protection, maintaining the high performance expected from Park Tool products.

How do I clean my chain before applying lube?

You can use a dedicated chain cleaner tool with a degreaser, or a stiff brush and degreaser solution. Rinse thoroughly with water and allow the chain to dry completely before applying CL-1.2.

Is this a 'wet' or 'dry' lube?

The CL-1.2 is described as a light 'wet' lube. This means it has a slightly more viscous consistency than a dry lube, which helps it adhere better and offers better protection against moisture and wear in a wider range of conditions.

Troubleshooting

Chain is noisy or squeaking

Ensure the chain is clean and dry. Apply a fresh coat of CL-1.2, allowing it to penetrate the links. Wipe off excess lubricant thoroughly.

Drivetrain feels sluggish or stiff

The chain may be dirty or require more lubrication. Clean the chain completely and reapply CL-1.2. Check for any obvious obstructions or damage to the chain or components.

Visible rust on the chain

Clean the chain thoroughly to remove surface rust. Apply CL-1.2 generously and allow it to soak in. Wipe away excess. Regular application should prevent future rust.

Lube appears to attract a lot of dirt

You may have applied too much lubricant. Ensure you wipe off all excess from the exterior of the chain after application. A light film is sufficient for lubrication.

Pros and Cons

Pros

  • Environmentally conscious formulation (PTFE-free)
  • Effective at reducing friction
  • Provides excellent rust and corrosion protection
  • Good for general, all-round use
  • Penetrates chain links well
  • Keeps components running smoothly

Cons

  • May not offer peak performance in extreme wet or dusty conditions compared to specialized lubes
  • Requires reapplication in harsh environments
  • Not explicitly designed for extreme temperature ranges

Setup, Compatibility & Care Instructions

Application:

  1. Ensure your bicycle chain is clean and dry before application.
  2. Apply a small amount of CL-1.2 to the rollers of each chain link while slowly backpedaling.
  3. Continue backpedaling for a few rotations to allow the lubricant to penetrate the links.
  4. Wipe off any excess lubricant from the outside of the chain with a clean rag. Over-application can attract dirt.

Compatibility:

  • The Park Tool CL-1.2 is compatible with all standard bicycle chains, including those on road bikes, mountain bikes, and hybrid cycles.
  • It is safe for use with most drivetrain components.

Care:

  • Store the bottle in a cool, dry place away from direct sunlight.
  • Keep the cap tightly closed when not in use to prevent evaporation and contamination.
  • For optimal performance, clean and reapply the lubricant periodically, especially after riding in wet or dirty conditions.