Xterminate Led Wall Mounted Sticky Fly Trap Killer - 12W
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 12W Xterminate LED Wall Mounted Sticky Fly Trap Killer is designed for commercial environments like kitchens, restaurants, and food processing areas, offering effective fly control while meeting strict food safety standards. Its XL size ensures broad coverage, though users should be aware that regular sticky pad replacement is necessary for optimal performance.
All features
| Model Part Number | 286289A |
|---|---|
| Brand | Xterminate |
Extended Product Information
FAQs
What is the recommended placement for the fly trap?
Place the trap on a wall in areas where flying insects are most active, such as near entrances, food preparation zones, or waste areas. Avoid placing it in direct sunlight or near competing light sources.
How often should I replace the sticky pad?
Sticky pads should be replaced when they are full of insects or have lost their adhesive quality, typically every 30 to 60 days. Heavy insect infestation may require more frequent replacement.
Is this product safe for use around food?
Yes, this unit is specifically engineered to meet strict food safety standards and uses a chemical-free sticky trap method, making it ideal for commercial kitchens and food processing areas.
Does the LED light emit heat?
The LED lights are designed to be energy-efficient and emit minimal heat, which is standard for this type of insect control device.
What are the dimensions of the XL sticky pad?
The XL sticky pads are designed to cover the effective area of the 12W unit, providing ample surface for insect capture. Specific dimensions can be found in the product's detailed specifications.
Can this unit be used outdoors?
This unit is designed for indoor commercial use only. Outdoor conditions may affect performance and durability.
What is the power consumption of the unit?
The unit is rated at 12W, indicating its power consumption.
Troubleshooting
Unit not attracting insects
Ensure the LED light is on and the unit is plugged in. Check if the sticky pad needs replacement. Relocate the unit to an area with higher insect traffic or closer to potential attractants.
Insects not sticking to the pad
The sticky pad may be old or contaminated. Replace with a fresh sticky pad. Ensure the unit is positioned correctly relative to insect flight paths.
LED light not working
Check the power connection. If the light still does not illuminate, the LED may need servicing or replacement. Contact customer support.
Unit making unusual noise
Ensure the unit is securely mounted and that no parts are loose. If the noise persists, contact customer support.
Pros and Cons
Pros
- Effectively attracts and traps flying insects.
- Meets stringent food safety standards for commercial use.
- Space-saving wall-mounted design.
- Chemical-free operation.
- XL size provides broad coverage.
Cons
- Requires regular replacement of sticky pads.
- May not be suitable for very large outdoor areas.
- Sticky pads can be visually unappealing to some.
- Initial setup requires careful placement for best results.
Setup, Compatibility & Care
Setup:
- Choose a suitable wall location, away from direct sunlight or competing light sources, and near insect activity.
- Ensure the mounting surface is secure to support the unit's weight.
- Plug the unit into a grounded electrical outlet.
- Ensure the sticky pad is correctly in place before activation.
Compatibility:
- This unit is designed for indoor commercial use.
- Ensure the electrical outlet is compatible with the device's power requirements.
Care:
- Sticky Pad Replacement: Replace the sticky pad when it becomes full of insects or loses its adhesion (typically every 30-60 days, depending on insect activity). Carefully remove the old pad and attach a new one.
- Cleaning: Unplug the unit before cleaning. Wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or immersing the unit in water. Ensure the unit is completely dry before plugging it back in.