Battery Starter and Charger - 12V/24V - 15Ah to 240Ah - 140A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 12V/24V Battery Starter and Charger Unit is designed for DIY enthusiasts and professional fleet operators who need a versatile and powerful solution for battery charging and vehicle starting. Its key benefit is the ability to efficiently charge batteries and provide a reliable boost for vehicles with flat batteries, across a wide battery range (15Ah to 240Ah). A potential caveat is its weight, making portability a consideration for some users. Key features include dual voltage output, high starting power, optimized charging capacity, and built-in safety protections.
All features
| Brand | Loops |
|---|
Extended Product Information
FAQs
What is the maximum battery capacity this unit can charge?
The unit is designed for batteries ranging from 15Ah up to 240Ah.
Can I use this charger for both 12V and 24V systems?
Yes, the unit features a switch to easily select between 12V and 24V outputs, making it versatile for different vehicles.
What is the peak starting current?
The unit provides a peak starting current of 140A (80A EN).
How do I know if the battery is fully charged?
The ammeter on the unit indicates the charging current. You can monitor this to gauge charging progress. For precise readings, a separate battery tester is recommended.
What safety features are included?
It includes built-in polarity protection to prevent damage from incorrect clamp connection and a panel-mounted 50A fuse for electrical safety.
What is the maximum charging rate?
The maximum charge output is 21A (14A EN), with 3 charging rate settings available.
How much does the unit weigh?
The net weight of the unit is 7.00kg.
Troubleshooting
Unit does not power on
Check that the power cord is securely plugged into a working 230V outlet and the unit. Ensure the fuse is intact.
No charging current indicated
Verify that the battery clamps are correctly and securely connected to the battery terminals. Ensure the correct voltage and mode are selected.
Starting function is weak or fails
Ensure battery clamps have a clean, solid connection. Check the vehicle's battery voltage; if extremely low, a longer charge may be needed before attempting to start. Verify the selected voltage matches the vehicle.
Unit shuts off during operation
This could indicate an overheat protection. Allow the unit to cool down for 10-15 minutes. Ensure ventilation is not blocked. Check for short circuits or excessively discharged batteries.
Pros and Cons
Pros
- Versatile dual voltage output (12V/24V) for various vehicles.
- High starting current (140A peak) for reliable jump-starts.
- Efficient charging with a maximum output of 21A.
- Suitable for a broad battery range from 15Ah to 240Ah.
- User-friendly interface with clear indicators and controls.
- Built-in safety features like polarity protection and fuse.
Cons
- Unit weight (7.00kg) may impact portability for some users.
- Requires a 230V supply voltage.
- Charging rates are limited to 3 stages.
- Maximum charge output might be slower for very large battery banks compared to dedicated industrial chargers.
Setup, Compatibility & Care
Setup:
- Ensure the unit is placed on a stable, level surface.
- Connect the red (+) clamp to the positive terminal of the battery and the black (-) clamp to the negative terminal or a suitable chassis ground point.
- Select the appropriate voltage (12V or 24V) for the vehicle's battery system.
- Plug the unit into a standard 230V power outlet.
- Use the controls to select charging or starting mode.
Compatibility:
- Battery Types: Suitable for lead-acid batteries.
- Battery Capacity: Compatible with batteries ranging from 15Ah to 240Ah.
- Voltage: Supports both 12V and 24V vehicle electrical systems.
Care:
- Keep the unit clean and free from dust and debris. Wipe with a dry or slightly damp cloth as needed; avoid harsh chemicals.
- Inspect cables and clamps regularly for wear or damage.
- Store the unit in a dry, protected environment when not in use.
- Ensure ventilation openings are not obstructed.