Sumex Jump Start Booster Cables - 3.5M - 350 Amp

Currently unavailable

Currently unavailable
The Sumex 350 Amp Jump Start Booster Cables are designed for vehicle owners who need a reliable solution for emergency battery failure in cars, motorcycles, vans, and even heavy-duty vehicles like lorries. These 3.5-meter cables provide the necessary reach for most roadside situations and are TUV/GS safety certified, though users must verify their engine displacement to ensure it remains within the 5.5L petrol or 3L diesel limit to avoid overheating the cables.
| Model Part Number | 2707006 |
|---|---|
| Brand | SUMEX |
Yes, these cables are compatible with both 12v and 24v systems.
No, these cables are rated for diesel engines up to 3L. Using them on a 4L engine may lead to overheating.
It means the product has been tested by independent authorities for safety, quality, and technical compliance.
It is common practice to run the donor engine for a few minutes to charge the dead battery slightly before attempting to start the disabled vehicle.
If the clamps become dirty or oxidized, gently wipe them with a clean, dry cloth to ensure a good electrical connection.
Check that the clamps have a firm, direct metal-to-metal connection on the battery terminals. Ensure you are not connected to painted surfaces or plastic covers.
This may indicate the engine size exceeds the 3.5L diesel or 5.5L petrol capacity. Disconnect immediately and allow the cables to cool down.
To maximize the lifespan of your Sumex booster cables, avoid letting the clamps touch each other while connected to a battery to prevent short-circuiting. After use, inspect the insulation for any cuts or fraying. If you notice exposed wiring, the cables should be replaced immediately. When storing the cables, ensure they are coiled loosely in the provided bag to prevent kinks or internal wire fatigue. Always verify that the donor vehicle battery has an equal or higher voltage rating than the vehicle being jumped to prevent damage to the donor vehicle's electronics.