Pebeo Setacolour Opaque Matt Fabrics Paint
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for textile artists, crafters, and DIY enthusiasts looking to add durable, opaque color to fabrics. The key benefit is achieving a professional matte finish with excellent coverage on both light and dark materials, even after washing. A potential consideration is the drying time required before the fabric can be handled or washed.
All features
| Brand | Pebeo |
|---|
Extended Product Information
FAQs
Can I use this paint on dark fabrics?
Yes, Pebeo Setacolour Opaque Matt Fabric Paint is specially formulated for excellent coverage on both light and dark fabrics.
How long does the paint take to dry?
The paint dries to the touch in approximately 1 hour. However, it requires heat setting after drying for maximum wash resistance.
What is the best way to apply the paint?
You can use brushes, sponges, or stencils for application. Ensure even application for best results.
How do I make the paint permanent?
The paint needs to be heat-set using an iron. Iron the decorated area on the reverse side for 5 minutes at a cotton setting (150°C/300°F) without steam, or use a pressing cloth.
What is the maximum wash temperature?
Once properly fixed, the paint is resistant to washing up to 40°C (104°F).
Can I mix different colors of Setacolour Opaque Matt paint?
Yes, the colors are generally intermixable to create new shades. Always test mixed colors on a scrap piece first.
How do I clean up after using the paint?
Clean your brushes, sponges, and any other tools immediately after use with soapy water.
Troubleshooting
Paint is too thick or clumpy
Ensure the bottle was shaken thoroughly. If still clumpy, the paint may be old or have been exposed to air. Try adding a tiny amount of water and mixing well, but avoid over-diluting.
Uneven coverage or streaking
Apply paint evenly with consistent strokes or dabbing motions. For very opaque results, consider a second thin coat after the first has dried. Ensure the fabric is taut while painting.
Design washes out after fixing
Ensure the paint was properly heat-set according to instructions (correct temperature and duration). Allow paint to cure for at least 24 hours after fixing before the first wash.
Color looks different when dry
This is normal for some opaque paints. Test the color on a scrap of the same fabric and allow it to dry completely to see the final shade before committing to your project.
Pros and Cons
Pros
- Excellent opaque coverage on both light and dark fabrics.
- Achieves a professional matte and soft-touch finish.
- Paint is flexible and remains vibrant after washing.
- Versatile application methods (brush, sponge, stencil).
- Quick drying time speeds up the creative process.
Cons
- Requires fixing (ironing) to achieve full wash resistance.
- May require multiple coats for very intricate or layered designs.
- Color may appear slightly different once fully dry compared to wet application.
Setup, Compatibility & Care
Setup:
- Ensure your fabric is clean and dry. Pre-wash new fabrics to remove any sizing agents.
- Shake the bottle well before use.
- Apply the paint using your chosen tool: brushes, sponges, or stencils.
Compatibility:
- Suitable for most natural and synthetic fabrics (cotton, wool, velvet, linen, jersey, synthetics, etc.).
- Test on a small, inconspicuous area first if unsure about fabric compatibility.
Care:
- Allow paint to air dry for at least 1 hour (quick drying).
- Fixing (Heat Setting): After drying, heat set the paint for maximum durability and washability. Iron the decorated area on the reverse side for 5 minutes at a cotton setting (150°C/300°F) without steam, or place a pressing cloth over the design and iron.
- Washing: Once fixed, the paint is resistant to washing up to 40°C (104°F).
- Turn the fabric inside out when washing. Hand wash or machine wash on a gentle cycle.
- Avoid harsh detergents or bleach.
- Clean tools immediately after use with soapy water.