Wieland H-Distributor - GST18i5 - 5 Way - 20A - 250V
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wieland H-Distributor GST18i5 is designed for building installers and electricians seeking a streamlined power distribution solution. Its key benefit is easy pluggability for efficient power or signal distribution, with this specific pastel blue model aiding in clear identification within complex installations. A potential caveat is its IP40 rating, limiting use to dry, protected environments.
All features
| Series | GST18i5 |
|---|---|
| Model Part Number | GST18I5V 3P1 B V PB02 |
| Brand | Wieland |
Extended Product Information
FAQs
What is the primary advantage of using a Wieland distributor?
The primary advantage is the easy pluggability, which significantly simplifies and speeds up electrical installations and modifications compared to traditional hardwiring.
What does the '1/3 distribution ratio' mean?
This refers to the distributor's configuration, likely meaning it takes one input and splits it into three outputs, or a similar segmented distribution pattern, suitable for specific system designs.
Can this distributor be used outdoors?
No, this distributor has an IP40 rating, meaning it is suitable for indoor use in dry environments only. It is not protected against water ingress.
How do I identify different circuits using this distributor?
This specific model features a pastel blue color, which can be used for clear identification of circuits, differentiating it from other systems or potentially other Wieland connectors with different colors.
What is the maximum current and voltage rating?
The distributor is rated for a maximum continuous current of 20A and a voltage of 250V AC.
What maintenance is required for this distributor?
Regular inspection for cleanliness and secure connections is recommended. Use a dry cloth for cleaning and avoid harsh chemicals. Ensure it remains in a dry environment.
Is this distributor halogen-free?
Yes, the housing material is Polyamide (PA) and the product is specified as halogen-free, which is a safety feature.
Troubleshooting
No power to connected devices
Verify that the main power source is active. Check that the input cable is securely connected to the distributor and the power source. Ensure all output connectors are fully seated and locked in place. Confirm the rated voltage (250V) and current (20A) are not exceeded.
Intermittent power or connection failure
Inspect all connections for signs of damage or wear. Ensure connectors are clean and free from debris. Check that the mechanical coding is correctly aligned for each connection. Vibration can sometimes loosen connections; ensure locking mechanisms are fully engaged.
Overheating at connection points
This indicates a potential overload or poor contact. Immediately disconnect power. Check that the total current draw of connected devices does not exceed the 20A rating. Inspect contact surfaces for damage or corrosion. Ensure the correct gauge wire is used for the connections.
Pros and Cons
Pros
- Streamlines electrical installations with pluggable connections.
- Color coding aids in system identification and management.
- Robust construction suitable for standard building environments.
- Offers flexible distribution with a 1/3 ratio.
- Halogen-free material contributes to safety in case of fire.
Cons
- IP40 rating restricts use to dry, indoor locations.
- Requires compatible Wieland GST18i5 connectors.
- Not suitable for high-vibration or outdoor environments.
- Surface mount design may require specific mounting considerations.
Setup, Compatibility & Care
Setup:
- Ensure the power source is disconnected.
- Connect the main power feed to the input port of the Wieland H-Distributor. This typically involves using a compatible Wieland GST18i5 male connector.
- Connect your loads (lights, equipment, etc.) to the distributor's output ports using compatible Wieland GST18i5 female connectors.
- Verify that all connections are secure and the integrated locking mechanism is engaged.
- Restore power and test functionality.
Compatibility:
This distributor is designed to work with the Wieland GST18i5 system. Ensure all connecting cables and components are also part of the GST18i5 series to guarantee proper fit, electrical integrity, and safety.
Care:
- Keep the distributor in a clean, dry environment. The IP40 rating means it is protected against solid objects larger than 1mm but offers no protection against water.
- Periodically inspect connections for dust or debris. Clean gently with a dry, lint-free cloth. Avoid using solvents or abrasive cleaners.
- Ensure the operating temperature remains within the specified limits (Max. continuous temperature resistance contact part = 100 °C).