CDA Integrated Fridge Freezer - White - E Rated

Currently unavailable

Currently unavailable
This CDA FW703 integrated fridge-freezer is designed for seamless kitchen integration and everyday convenience. Its key benefit lies in its Low Frost System, reducing manual defrosting frequency. A potential caveat is its E energy efficiency rating. This 70/30 split appliance offers a total net capacity of 270L, featuring a 195L fridge and a 75L freezer, with practical additions like a door open alarm and reversible doors for flexible installation.
| Colour | White |
|---|---|
| Energy Efficiency | E |
| Model Part Number | FW703 |
| Brand | CDA |
The Low Frost system significantly reduces the frequency of manual defrosting compared to traditional static freezers. You may only need to defrost it once or twice a year, depending on usage and ambient conditions. Monitor ice build-up visually.
Yes, the doors are designed to be reversible. This allows you to choose the opening direction that best suits your kitchen layout. Please refer to the setup instructions for the specific procedure.
This model has an E energy efficiency rating on the A to G scale.
The noise level is rated at 35 dB, which is considered quiet operation and should not be disruptive in a typical kitchen environment.
The total net capacity is 270 litres, with 195 litres for the fridge compartment and 75 litres for the freezer compartment.
No, this model features a 'Low Frost' system, which reduces ice build-up but does not eliminate the need for occasional manual defrosting. It does not have a 'No Frost' feature for either the fridge or the freezer.
An audible Door Open Alarm will sound if the door is left ajar, helping to prevent energy loss and keep food at the correct temperature.
Check that the power plug is fully inserted and the circuit breaker is on. Ensure the temperature settings are correct. Verify that the doors are closing properly and not blocked by food items. Allow 24 hours for the unit to reach the desired temperature after initial setup or significant temperature fluctuations.
Ensure the appliance is level using the adjustable feet. Check that it is not touching surrounding cabinets or walls. Verify that items inside are not rattling against each other or the appliance walls.
Check that the drain hole at the back of the fridge compartment is not blocked. Gently clear any blockage with a soft, non-metallic object. Ensure the appliance is level.
Check for obstructions around the door seal and frame. Ensure the appliance is level, as an unlevel unit can cause doors to sag. If the doors have been reversed, ensure the hinges are correctly reassembled.
The Low Frost system reduces build-up, but some is normal. If excessive ice forms, manual defrosting is required. Ensure the freezer door is not being left open for extended periods and that warm, moist air is not entering.
Setup:
This is a built-in appliance, designed to be installed within kitchen cabinetry. Ensure the cabinet dimensions are suitable for the unit's external measurements (Height: 1769 mm, Width: 540 mm, Depth: 540 mm). The appliance requires adequate ventilation, typically at the back and sides, as per manufacturer instructions. Connection to a standard power outlet is required. The reversible door hinge can be adjusted during installation to suit your kitchen layout. Adjustable feet at the base allow for levelling on uneven floors.
Compatibility:
Care: