Elica Plat 55cm Wall Extractor Hood - White - A
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to understand and effectively use the Elica Plat 55cm Wall Extractor Hood. It offers powerful extraction with its 730 m³/h capacity, featuring a sleek design and easy-to-use touch controls. Keep in mind that while it offers both ducted and recirculating options, the ducting hose is not included. This guide will provide you with all the information you need to set up, maintain, and get the most out of your Elica Plat hood.
All features
| Colour | White |
|---|---|
| Energy Efficiency | A |
| Model Part Number | PRF0165707 |
| Brand | Elica |
Extended Product Information
FAQs
How do I clean the grease filter?
The grease filter is washable. Remove it from the hood and wash it in warm, soapy water. Allow it to dry completely before re-installing.
How often should I replace the carbon filter?
The carbon filter should be replaced every 3 to 6 months, depending on usage. Refer to the user manual for specific recommendations.
What type of lighting does the hood use?
The hood uses LED lighting.
Can I install this hood myself?
Installation is possible, but it is recommended to follow the instructions carefully or seek professional assistance.
What is the noise level of the extractor hood?
The noise level is 57 dB(A).
What is the energy efficiency class?
The energy efficiency class is A.
What are the dimensions of the hood?
The width is 450 mm, the height (min) is 55 cm, and the depth is 250 mm.
Troubleshooting
Extractor hood is not turning on.
Check the power connection and ensure the power outlet is working. Verify that the hood is switched on at the control panel.
Extractor hood is not extracting effectively.
Check and clean the grease filters. Ensure that the ducting (if installed) is not blocked. If using recirculating mode, ensure the carbon filter is not saturated and needs replacement.
The hood is making excessive noise.
Check the filter and ensure it is properly installed. Inspect the fan blades for any obstructions. Ensure that the hood is installed correctly and is not vibrating against any other surface.
Pros and Cons
Pros
- Efficient odour removal with a 730 m³/h extraction capacity.
- Sleek and modern design with White Glass finish.
- Easy-to-use touch controls for convenient operation.
- Energy-efficient with an A rating.
- Low noise level for a more pleasant cooking experience.
- Easy filter maintenance with a washable filter.
Cons
- Ducting hose not included, requiring separate purchase.
- May require professional installation depending on the setup.
- The filter may need frequent cleaning depending on usage.
- Limited information available for filter replacement.
Setup, Compatibility & Care
- Installation: The Elica Plat hood can be installed between wall cabinets or as a standalone unit. Ensure that you have adequate space and follow the provided installation instructions.
- Compatibility: This hood is compatible with both ducted and recirculating systems. For ducted installations, you will need to purchase a ducting hose separately. For recirculating installations, ensure that the carbon filter is in place.
- Cleaning: The flat front panel can be raised via hinges for easy access to the filters. Clean the washable filter regularly (as directed in the manual). Use a damp cloth to clean the exterior glass surface. Avoid abrasive cleaners.
- Filter Maintenance: Clean the grease filter regularly to maintain optimal performance. The carbon filter (if used) needs to be replaced periodically. Refer to the manual for specific instructions and replacement frequency.
- Power: Ensure the hood is connected to a stable power source.