Kenable Balanced XLR 3 Pin Socket to 6.35mm Male Stereo Jack Plug Cable - Black - 5m
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 5-meter Kenable balanced audio cable is designed for professionals and hobbyists needing reliable signal transmission between XLR microphones and 6.35mm (1/4 inch) stereo jack inputs. Its key benefit is providing balanced, noise-reduced audio transfer for clear sound, though it's specifically for balanced signals and not simple mono unbalanced connections. Features include pure copper conductors, nickel-plated connectors, and integral strain reliefs for durability.
All features
| Colour | Black |
|---|---|
| Model Part Number | 005311 |
| Brand | kenable |
Extended Product Information
FAQs
Can I use this cable for stereo audio?
This cable is designed for balanced mono signal transmission, even though it has a stereo jack. It is not intended for typical unbalanced stereo audio sources like consumer headphones or standard stereo line-out jacks.
What is the difference between balanced and unbalanced audio?
Balanced audio uses three conductors (positive, negative, and ground) to cancel out interference and noise, allowing for longer cable runs and cleaner signals. Unbalanced audio typically uses two conductors and is more susceptible to noise, especially over longer distances.
Will this cable work with a mono 6.35mm input?
It may work with some mono 6.35mm inputs, but it's designed for balanced connections. The stereo plug might not make full contact in a mono jack, or the signal handling might differ depending on the input's design.
What does 'two core screened' mean?
It means the cable contains two signal wires (cores) plus a separate braided or foil shield (screen) around them. This shield helps to block electromagnetic interference from reaching the signal wires.
Is this cable suitable for instrument guitars?
This cable is designed for microphone and line-level balanced signals. For most electric guitars, which have unbalanced mono outputs, a standard unbalanced 6.35mm mono jack cable is generally more appropriate.
How should I clean the connectors?
Use a dry, soft cloth to gently wipe the metal connectors. Avoid using liquids or abrasive materials, which could damage the plating or internal connections.
Troubleshooting
No sound or intermittent audio
Ensure both XLR and 6.35mm connectors are fully seated in their respective sockets. Check that the destination device is configured for a balanced stereo or mono input. Test with a different cable or different equipment to isolate the issue.
Humming or buzzing sound
Verify that the cable is being used with balanced inputs on both ends where possible. Ensure all equipment is properly grounded. Check for nearby sources of electrical interference (e.g., power cables, fluorescent lights).
Cable feels stiff or fragile
This cable is designed for professional use and may feel more robust than typical consumer cables. However, avoid extreme bending or crushing. If damage is suspected, replace the cable.
Pros and Cons
Pros
- Provides clear, balanced audio signal transmission.
- Durable construction with strain reliefs and nickel-plated connectors.
- Effective noise reduction due to screened cable design.
- Suitable for professional audio applications like studio recording and live sound.
- Good length for flexible setup options.
Cons
- Primarily designed for balanced signals; may not be suitable for all unbalanced mono applications.
- Stereo jack may not be compatible with all 6.35mm mono inputs.
- Specific length (5m) may be too long or too short for some user needs.
Setup, Compatibility & Care
Setup:
- Connect the XLR socket end to your audio source (e.g., microphone).
- Connect the 6.35mm (1/4 inch) stereo jack plug end to your destination device (e.g., mixer, audio interface, amplifier).
Compatibility:
- Source: Designed for devices with an XLR output, typically microphones or balanced line-level outputs.
- Destination: Compatible with devices featuring a 6.35mm (1/4 inch) stereo jack input that specifically supports balanced signals.
- Note: While it has a stereo plug, it is intended for balanced mono signal transmission. It is not typically used for stereo unbalanced signals.
Care:
- Avoid excessive bending or kinking of the cable.
- Store the cable loosely coiled when not in use.
- Keep connectors clean and dry. Use a dry, soft cloth to wipe connectors if necessary.
- Protect connectors from dust and debris.
- Ensure the cable is unplugged by gripping the connector, not the cable itself.