GMK 2410 Contact Adhesive - Brown - 185 g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for professionals and DIY enthusiasts needing a strong, fast-curing adhesive for flexible bonding. The WEICON GMK 2410 Contact Adhesive offers high initial adhesion for bonding rubber to rubber or rubber to metal, as well as various other materials like foam, leather, textiles, and wood. A key caveat is its unsuitability for certain plastics like polystyrene foam, polyethylene, and PVC soft foam.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 16100185 |
| Brand | Weicon |
Extended Product Information
FAQs
What is the shelf life of WEICON GMK 2410 Contact Adhesive?
The adhesive typically has a shelf life of 12 months when stored unopened in original packaging under recommended conditions (cool and dry).
Can this adhesive be used for outdoor applications?
Yes, when properly applied to compatible materials, the permanently elastic nature and strong bond make it suitable for many outdoor applications, provided the materials themselves are weather-resistant.
How do I clean up uncured adhesive?
Uncured adhesive can be removed using WEICON Solvent Cleaner S or WEICON Cleaner W. For cured adhesive, mechanical removal might be necessary.
What is the working temperature range for applying this adhesive?
It is recommended to apply the adhesive within a temperature range of +5°C to +35°C. Avoid application in direct sunlight or on very hot surfaces.
Is this adhesive suitable for bonding PVC?
It is not suitable for PVC soft foam or PVC artificial leather. For other types of PVC, testing for compatibility is advised.
What does 'high initial adhesion' mean?
High initial adhesion means the adhesive creates a strong bond very quickly after the parts are pressed together, often allowing for immediate handling without the need for prolonged clamping or support.
Troubleshooting
Adhesive not bonding strongly
Ensure surfaces were thoroughly cleaned, dried, and roughened. Verify adhesive was applied to both surfaces and allowed adequate flash-off time before pressing.
Slow curing time
Curing time is temperature and humidity dependent. Ensure application is within recommended temperature ranges and consider increased ventilation to aid solvent evaporation.
Adhesive remains tacky after extended period
This may indicate insufficient flash-off time, excess application, or bonding incompatible materials. Re-evaluate application process or check material compatibility.
Pros and Cons
Pros
- Offers excellent initial grab for quick assembly.
- The permanent elasticity accommodates material expansion and contraction.
- Suitable for a broad spectrum of common bonding applications.
- Fast curing time increases work efficiency.
- Complies with high quality and safety standards.
Cons
- Not suitable for bonding polyethylene, polypropylene, or soft PVC.
- Surface preparation (cleaning, drying, roughening) is critical for optimal performance.
- Requires adequate ventilation during use due to its chemical composition.
Setup, Compatibility & Care
Preparation: Ensure surfaces to be bonded are clean, dry, and free from dust, grease, and oil. Roughening smooth surfaces can significantly improve bond strength. For optimal results, apply the adhesive to both surfaces.
Application: Apply a thin, even layer of adhesive to both prepared surfaces. Allow to flash off until tacky (approximately 5-15 minutes, depending on temperature and humidity). Press the bonded parts together firmly. A roller can be used to ensure uniform pressure.
Compatibility: Suitable for bonding rubber, foam rubber, PE foam, leather, felt, insulating materials, textiles, wood, and many plastics. Not suitable for: Polystyrene foam, polyethylene, polypropylene, PVC soft foam, and PVC artificial leather.
Care: Store in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed after use. For long-term storage, keep the adhesive in its original packaging.