Kenable UK Mains Power Plug - Black Quickfit 3 Pin 13 Amp
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for individuals needing a reliable and easy-to-install 3-pin UK mains power plug. Its key benefit is the 'quickfit' automatic cord grip for straightforward and secure wiring. A potential consideration is that it's a single plug, so multiple units may be required for various appliances. This plug offers a durable, compliant solution for connecting appliances to the UK power grid, featuring a 13A fuse and robust construction.
All features
| Model Part Number | 004277 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
What does 'BS 1363/A compliant' mean?
This means the plug meets the safety and performance standards set by the British Standards Institution for 13 Amp wall plugs and socket outlets.
Is this plug suitable for outdoor use?
No, this plug is designed for indoor use only. It is not weatherproofed.
Can I replace the 13A fuse with a lower rating?
Yes, you can replace the 13A fuse with a lower rated fuse (e.g., 3A or 5A) if the appliance requires it. Always use BS 1362 approved fuses.
How do I know if the automatic cord grip is working correctly?
When the casing is screwed shut, the grip mechanism should firmly hold the outer layer of the power cable, preventing it from sliding out.
What cable sizes can this plug accommodate?
This plug is designed for standard UK mains cable sizes. The automatic cord grip allows for some adjustment, but excessively thick or thin cables may not be held securely.
Do I need to use all three wires (Live, Neutral, Earth)?
Yes, for safety, all three wires should be connected if present on the appliance cable. The Earth wire is a crucial safety feature.
Troubleshooting
Appliance not powering on after plugging in.
Check that the plug is firmly seated in the wall socket. Verify that the internal wires are correctly connected to the L, N, and E terminals. Ensure the appliance's fuse (if separate) is intact. Confirm the wall socket is operational by testing with another device.
Cable feels loose or can be pulled out of the plug.
Ensure the automatic cord grip screws are tightened sufficiently to grip the outer sheath of the cable securely. Do not overtighten to the point of damaging the cable.
Plug casing feels warm during use.
This could indicate a loose connection or that the appliance is drawing more current than the plug/fuse is rated for. Check connections and ensure the fuse is appropriate. If the issue persists, discontinue use and inspect the appliance.
Pros and Cons
Pros
- Compliant with UK safety standards (BS 1363/A).
- Easy and secure installation with the automatic cord grip.
- Includes a pre-fitted 13A fuse for essential protection.
- Robust build quality for reliability.
- Suitable for a wide range of UK electrical appliances.
Cons
- Sold individually, requiring purchase of multiple units for several appliances.
- Basic design, may not suit aesthetic preferences in all settings.
- Requires basic electrical wiring knowledge for installation.
Setup, Compatibility & Care
Setup:
- Ensure the appliance is unplugged and the power source is switched off.
- Unscrew the existing plug casing or prepare to wire the new plug.
- Remove approximately 3-4 cm of the outer cable insulation.
- Strip about 0.5 - 1 cm of insulation from each internal wire (Live, Neutral, Earth).
- Loosen the screws on the cord grip and insert the cable.
- Connect the Live (usually brown), Neutral (usually blue), and Earth (green/yellow) wires to the corresponding terminals inside the plug.
- Ensure no stray wire strands are visible and that the insulation reaches the terminal entry point.
- Tighten the cord grip screws firmly onto the cable's outer sheath, ensuring a secure grip.
- Replace and secure the plug casing.
- Check that the fuse is correctly rated for the appliance (this plug comes with a 13A fuse).
Compatibility:
- This is a Type G plug, designed for use in the United Kingdom and other countries with Type G sockets.
- Suitable for appliances requiring up to 13 Amps and operating at 230V AC / 50Hz.
Care:
- Keep the plug clean and dry.
- Periodically check the cord grip and connections for tightness, especially if the cable is moved frequently.
- Do not use if the casing is damaged or cracked.