Rocket TT Treadmill Lube 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for owners of treadmills, cross trainers, and other fitness equipment experiencing noise or belt issues. The Rocket TT Treadmill Lube offers a cost-effective solution to reduce friction, minimize noise, and extend the lifespan of your equipment. A key caveat is the need to ensure the equipment is disconnected from power before application for safety.
All features
| Model Part Number | RTL400 |
|---|---|
| Brand | Rocket TT |
Extended Product Information
FAQs
How often should I apply the treadmill lube?
For optimal performance and longevity, it is generally recommended to apply treadmill lubricant every 3-6 months, or more frequently if you notice increased noise or resistance. Refer to your equipment's manual for specific recommendations.
Can I use this on outdoor equipment?
This product is specifically formulated for indoor fitness equipment. Its effectiveness and suitability for outdoor elements have not been tested.
Is this lubricant safe for all types of treadmill belts?
Yes, the 100% silicone formula is designed to be safe for most common treadmill belt materials. Always check your treadmill manufacturer's recommendations if unsure.
What does 'low odour' mean?
Low odour means the product has a minimal scent during and after application, making it more pleasant to use in an indoor environment compared to lubricants with strong chemical smells.
Can I use this lubricant on the deck of my treadmill?
The primary application is the underside of the belt. While some lubricants can be used on the deck, this product is optimized for belt-to-deck friction reduction by applying it directly to the belt.
How do I ensure I don't spray too much?
Use short bursts of spray and the included straw for targeted application. Wipe away any excess immediately with a clean cloth. It's better to apply a thin, even layer and reapply if needed than to over-apply.
Troubleshooting
Equipment remains noisy after application.
Ensure the lubricant was applied directly to the belt underside and not just the deck. Reapply if necessary, ensuring even coverage. Check for other mechanical issues unrelated to belt friction.
Belt is still slipping or fluctuating.
Confirm the belt is properly tensioned according to the manufacturer's guidelines. The lubricant may need time to fully permeate the belt; run the equipment at a low speed for a few minutes. Ensure no excess lubricant is causing slippage.
Spray nozzle is clogged.
Ensure the yellow cap is in the 'ON' position. If it persists, carefully try to clear the nozzle with a fine pin while the can is in a safe, upright position. Ensure the cap was in the 'OFF' position during storage.
Product leaves residue on the floor.
This can happen if too much product is used or if application is not precise. Ensure excess is wiped off immediately after application. Protect the floor with a drop cloth during application if concerned.
Pros and Cons
Pros
- Reduces operational noise effectively.
- Prevents belt slippage and ensures smooth operation.
- Non-toxic and low-odor formula for safe indoor use.
- Compatible with a wide variety of fitness equipment.
- Helps to extend the lifespan of valuable exercise machines.
Cons
- Requires careful application to avoid overspray.
- Effectiveness may vary based on the specific equipment model.
- Regular application is necessary for sustained benefits.
Setup, Compatibility & Care Instructions
Setup and Application:
- Disconnect Power: Crucially, always disconnect your equipment from the power supply before starting any lubrication process.
- Clean Belt Edges: Remove any accumulated dust or debris from the edges of the treadmill belt.
- Prepare Can: Shake the can well to ensure the lubricant is thoroughly mixed. Push the yellow safety cap forward to the 'ON' position.
- Application Method: If your equipment has an oil injection hole, you can use that. Otherwise, lift the belt slightly and spray the lubricant directly onto the underside of the belt. Use the attached straw for precise application. Repeat on the opposite side of the belt for even coverage.
- Wipe Excess: Use a clean cloth to wipe away any excess lubricant that may have dripped.
Compatibility:
This lubricant is formulated for use on a wide range of gym and fitness equipment, including but not limited to:
- Treadmills
- Cross trainers
- Multi-gyms
- Exercise bikes
- Rowing machines
- Step machines
Care:
Store the can in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is in the 'OFF' position after use to prevent accidental spraying. Regularly inspect your equipment for wear and tear; this lubricant helps maintain components but does not replace the need for general maintenance.