Loctite Double Bubble Epoxy - 2015058
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Loctite Double Bubble Epoxy (2015058) for quick repairs on various materials. The key benefit is its fast-setting time, allowing for rapid fixes. However, it's designed for single-use applications, so plan accordingly.
All features
| Model Part Number | 2015058 |
|---|---|
| Brand | Loctite |
Extended Product Information
FAQs
How long does it take for Loctite Double Bubble Epoxy to set?
It sets in approximately five minutes.
What materials can I use it on?
It can be used on metals, wood, ceramics, glass, stone, and concrete.
Is it waterproof?
Yes, once cured, it is waterproof.
How should I store the epoxy?
Store in a cool, dry place away from extreme temperatures.
What is the shelf life?
Check the expiration date on the package.
Can I use this for large projects?
It is designed for single-use and smaller applications.
What happens if I don't mix the two parts properly?
The epoxy will likely not cure correctly, resulting in a weak or failed bond.
Troubleshooting
Epoxy doesn't set.
Ensure the two parts are thoroughly mixed. Make sure the ambient temperature is within the recommended range. Check the expiration date.
Bond is weak.
Ensure surfaces were properly cleaned and prepared. Allow for the full cure time before applying stress.
Epoxy is difficult to dispense.
Ensure the packet is fully broken to allow both parts to mix and flow easily.
Pros and Cons
Pros
- Fast setting time allows for quick repairs.
- Bonds to a variety of substrates.
- Convenient single-use packaging minimizes waste and simplifies application.
- Provides a strong and durable bond.
Cons
- Single-use design may not be cost-effective for large projects.
- Working time is limited due to the fast-setting nature.
- Not ideal for projects requiring precise measurements of epoxy.
- Limited quantity per packet.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free from grease or oil.
- Mixing: Break the packet to release the two components and mix thoroughly for about 1 minute until a uniform color is achieved.
- Application: Apply the mixed epoxy to the surfaces to be bonded.
- Assembly: Join the parts and hold them together firmly for at least 5 minutes until set.
- Curing: Allow the epoxy to fully cure according to the package instructions for maximum strength.
Compatibility: Loctite Double Bubble Epoxy is compatible with metals, wood, ceramics, glass, stone, and concrete.
Care: Store the epoxy in a cool, dry place. Avoid extreme temperatures. Discard any unused portions after use, as it is a single-use product.