Bond it Astro Pro Seaming Adhesive - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone installing or repairing artificial grass, offering a strong and flexible adhesive solution. The Bond It Astro Pro Seaming Adhesive provides excellent bonding, even on wet surfaces, with rapid cure times. However, ensure proper surface preparation for optimal results.
All features
| Colour | Green |
|---|---|
| Model Part Number | BDAPROGN |
| Brand | Bond it |
Extended Product Information
FAQs
What surfaces can I use the adhesive on?
The adhesive can be used on artificial grass, ceramics, concrete, glass, metal, mortar, plaster, and wood.
Can I use this adhesive outdoors?
Yes, the adhesive is suitable for both indoor and outdoor use in all weather conditions.
How long does it take for the adhesive to cure?
Cure times vary depending on the temperature and humidity. Always refer to the product packaging for specific instructions.
Is the adhesive solvent-free?
Yes, the adhesive is solvent-free and environmentally friendly.
Can I paint over the adhesive?
Yes, the adhesive is overpaintable, allowing it to match the colour of the artificial grass surface.
What should I do if the adhesive gets on my skin?
Wash the affected area with soap and water. If irritation persists, consult a doctor.
How should I store the adhesive?
Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Is the adhesive suitable for wet surfaces?
Yes, it can be applied directly to wet surfaces.
Troubleshooting
Adhesive is not bonding properly.
Ensure the surfaces are clean and dry. Check the expiry date of the adhesive. Apply more adhesive and allow more time to cure.
Adhesive takes too long to cure.
Ensure the temperature is within the recommended range. Check the humidity levels. Apply less adhesive.
Adhesive is visible after application.
Use the right amount of adhesive during application and remove any excess immediately. Once cured, the surface can be painted.
Pros and Cons
Pros
- Strong and durable bond.
- Suitable for various surfaces.
- Fast curing time.
- Flexible and accommodating to movement.
- Easy to apply and work with.
- Environmentally friendly.
Cons
- Requires proper surface preparation for best results.
- May require more than one application for certain surfaces.
- Colour is limited to green, which may not match all artificial grass.
- Specific application techniques needed for optimal performance.
- Ensure adequate ventilation during application, despite being odourless.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from loose debris, oil, or grease.
- Application: Apply the adhesive evenly to the surfaces, following the manufacturer's instructions.
- Bonding: Join the surfaces, ensuring good contact and apply pressure if necessary.
- Curing Time: Allow sufficient time for the adhesive to cure fully, as indicated on the product packaging. Cure times can vary based on temperature and humidity.
- Compatibility: Compatible with a wide range of materials, including artificial grass, concrete, wood, metal, and more. Always test on a small, inconspicuous area first, especially when used on sensitive or unfamiliar materials.
- Care: Once cured, the adhesive requires minimal maintenance. Avoid harsh chemicals or abrasive cleaners. Regular cleaning of the artificial grass will help maintain the bond and overall appearance.