Porcelaine 150 Outliner Paint - Tourmaline Red

Currently unavailable

Currently unavailable
The Pebeo Porcelaine 150 Outliner Paint in Tourmaline Red is designed for artists, crafters, and home decorators looking to add precise, raised details to ceramic, porcelain, and glass surfaces. Its key benefit is the creation of intricate patterns and lettering that become permanent and dishwasher-safe after heat-setting. A potential caveat is the need for careful oven handling during the heat-setting process.
| Model Part Number | 036-003 |
|---|---|
| Brand | Pebeo |
While the paint becomes dishwasher-safe after heat setting, it is not recommended for direct food contact surfaces. Use it for decorative purposes only on areas that do not touch food during preparation or consumption.
The paint requires a minimum of 24 hours to air dry before it can be heat-set in the oven.
Preheat your oven to 150°C (300°F) and bake the decorated item for 35 minutes. It is crucial to place the item in a cold oven and let it heat up together.
Yes, once the paint has been properly heat-set, the decoration is dishwasher-safe.
Pebeo Porcelaine 150 Outliner Paint works on porcelain, ceramic, glass, and earthenware.
The paint becomes permanent and durable after undergoing the heat-setting process in a conventional oven.
If the paint is still wet, it can usually be wiped away with a damp cloth or paper towel. Once dry or heat-set, it is permanent and cannot be removed.
Ensure the tube is not clogged. Shake the tube vigorously. If the nozzle is blocked, carefully clean it with a pin or fine needle.
Apply thicker, continuous lines. Avoid spreading the paint too thinly. Ensure the nozzle is held closer to the surface for a more pronounced bead.
Verify that the paint was completely dry before heat setting (minimum 24 hours). Ensure the oven temperature and duration (150°C for 35 minutes) were correctly followed. Make sure the surface was properly cleaned and degreased before application.
Practice on scrap material first to get a feel for the pressure needed. Hold the tube at a consistent angle and dispense paint at a steady pace.
Setup: Ensure your ceramic, porcelain, or glass surface is clean, dry, and free from grease. Shake the tube well before use. Puncture the seal with the tip and attach the nozzle if needed.
Compatibility: This paint is specifically designed for porcelain, ceramic, glass, and earthenware. It is not intended for direct food contact surfaces.
Care: After application, allow the paint to air dry for a minimum of 24 hours. Once dry, heat-set the item by placing it in a preheated oven at 150°C (300°F) for 35 minutes. Do not place items directly into the hot oven; place them in a *cold* oven and heat from there. After heat setting, the decorated item is dishwasher-safe and resistant to scrubbing. Clean tools with soap and water immediately after use.