Wynns Stop Smoke Oil Additive Petrol & Diesel Engines Reduce Exhaust Smoke 325ml - Wynns - 50865

Wynns Stop Smoke Oil Additive is designed to reduce exhaust smoke caused by oil burning. It is par...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for vehicle owners seeking to reduce exhaust smoke and improve engine performance, particularly in older engines. Wynns Stop Smoke Oil Additive offers a straightforward solution to diminish oil burning and related issues. A key caveat is that while it effectively addresses symptoms, it may not resolve underlying mechanical problems. This guide will help you understand how to use Wynns Stop Smoke to improve your engine's performance.

All features

Model Part Number50865
BrandWynns

Extended Product Information

FAQs

How often should I use Wynns Stop Smoke?

It is recommended to use Wynns Stop Smoke with every oil change, especially in older engines or those prone to oil burning.

Can I use Wynns Stop Smoke in a new engine?

While it is safe to use, the benefits are most noticeable in older engines. In new engines, it may not be necessary.

Will Wynns Stop Smoke damage my engine?

No, Wynns Stop Smoke is compatible with all types of engine oils and will not damage your engine when used as directed.

How long does it take to see results?

You may see some improvement soon after the additive is used, but full effects can take a few hundred miles of driving.

Is Wynns Stop Smoke a permanent fix?

No, it is not a permanent fix. It helps to manage symptoms of oil burning. It won't repair mechanical issues.

Can I use Wynns Stop Smoke with synthetic oil?

Yes, Wynns Stop Smoke is compatible with both mineral and synthetic oils, as well as single and multigrade oils.

What if I add too much Wynns Stop Smoke?

Adding more than the recommended amount is not advised, as it won't increase effectiveness and might cause issues. Stick to the recommended dosage.

Troubleshooting

Exhaust smoke persists after use.

Ensure correct application and dosage. Check for other mechanical issues like worn valve seals or piston rings. Consider a follow-up treatment at the next oil change.

Engine performance doesn't improve.

The additive may not be effective if the engine damage is severe. Have a mechanic check for serious internal engine issues.

Increased engine noise.

This is unlikely, but if it happens, stop using the product immediately and seek professional mechanical advice. Ensure the correct oil type and level.

Additive does not mix with oil.

Make sure the engine is warm. Ensure the product is fully mixed into the oil. This usually resolves itself with engine operation.

Pros and Cons

Pros

  • Reduces visible exhaust smoke.
  • Improves engine performance in older vehicles.
  • Compatible with a wide range of engine oil types.
  • Easy to use; simply add to the engine oil.
  • Helps to reduce engine noise.
  • Can extend the life of an engine by improving compression.

Cons

  • May not fix underlying mechanical issues.
  • Effectiveness can vary depending on engine condition.
  • Requires regular use for continued benefits.
  • Does not address the root cause of oil burning.
  • Results may not be immediately noticeable.
  • Could be ineffective in severely damaged engines.

Setup, Compatibility & Care

  1. Preparation: Ensure the engine is warm before adding the additive.
  2. Application: Pour the entire contents of the Wynns Stop Smoke bottle (325ml) into the engine oil.
  3. Oil Type Compatibility: This additive is compatible with all types of engine oils, including mineral, synthetic, single, and multigrade oils.
  4. Engine Types: Suitable for petrol, LPG, and diesel engines.
  5. Dosage: Use one bottle per oil change. The product is designed to treat the entire oil system.
  6. Regular Use: For best results, consider using Wynns Stop Smoke with each oil change, especially in older engines.