Erfurt Wallrock Thermal Liner Adhesive - White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Erfurt Wallrock Thermal Liner Adhesive. It helps users understand how to apply the adhesive for optimal results, ensuring proper installation of Wallrock Thermal Liner. Keep in mind that thorough surface preparation is essential for the best performance and adhesion. This guide will help you understand the key features, setup, and troubleshooting for the product.
All features
| Colour | White |
|---|---|
| Model Part Number | DC31920 |
| Brand | Erfurt |
Extended Product Information
FAQs
How much adhesive do I need?
A 5kg tub contains enough adhesive for 1 roll of Wallrock Thermal Liner. A 10kg tub is sufficient for a minimum of 2 rolls.
Can I use this adhesive on other types of wallpaper?
This adhesive is specifically formulated for Wallrock Thermally efficient wallpapers, sound insulation and polystyrene insulation products. Using it with other types of wallpaper might not provide the best results.
How do I apply the adhesive?
Apply the adhesive directly to the wall using a brush or roller. Ensure even coverage.
What should I do if the liner doesn't stick?
Make sure your wall is clean and the adhesive is applied evenly. Press the liner firmly against the wall and ensure full contact. If the problem persists, ensure you are using the correct adhesive for your liner.
How long does it take for the adhesive to dry?
Drying times will vary depending on environmental conditions (temperature, humidity), but generally, allow sufficient time for the adhesive to cure before applying any further finishes.
How should I store the adhesive?
Store the adhesive in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
Adhesive is not sticking to the wall
Ensure the wall surface is properly prepared. Remove any loose paint or wallpaper. The surface should be clean and dry. Use an appropriate amount of adhesive for the area.
Air bubbles appear under the liner
Smooth out any air bubbles immediately after applying the liner using a smoothing tool or a clean cloth. Ensure even adhesive application.
Liner is peeling off the wall
Make sure that enough adhesive was applied. Ensure that the liner is pressed firmly onto the wall immediately after application. Also, check the compatibility of the liner with the adhesive.
Pros and Cons
Pros
- Easy to apply directly to the wall
- High strength formula ensures a strong bond
- Moisture resistant properties for durability
- Ready to use, saving time
- Suitable for various Wallrock products
Cons
- Requires proper surface preparation for best results
- Coverage dependent on the surface and application method
- May require more than one tub for larger areas
Setup, Compatibility & Care
- Preparation: Ensure the wall surface is clean, dry, and free from loose paint or wallpaper.
- Application: Apply the adhesive directly to the wall using a brush or roller. Roll straight from the tub onto the wall.
- Liner Application: Immediately apply the Wallrock Thermal Liner to the adhesive-covered wall.
- Compatibility: This adhesive is specifically designed for Wallrock Thermally efficient wallpapers, sound insulation and polystyrene insulation products.
- Coverage: One 5kg tub contains enough adhesive for 1 roll of Wallrock Thermal Liner, a 10kg tub is sufficient for a minimum of 2 rolls.
- Care: Store in a cool, dry place. Clean tools immediately after use.