Living and Home 2000W Portable Electric High Pressure Washer - White - 6m

Prepare to power wash everything with this high-pressure cleaner in no time at all. Its strong 200...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

The Living and Home 2000W Portable Electric High Pressure Washer is designed for homeowners seeking a powerful yet manageable solution for a variety of outdoor cleaning tasks. Its primary benefit is the efficient removal of tough grime from surfaces like patios, cars, and garden furniture, thanks to its strong motor and adjustable spray settings. A minor caveat is that assembly is required before first use.

All features

ColourWhite
Model Part NumberAI1375
BrandLiving and Home
Options6m

Extended Product Information

FAQs

What is the working pressure of this washer?

The working pressure is 10MPa (100 bar), with an allowable pressure of 15MPa (150 bar).

How do I adjust the spray pattern?

You can adjust the spray pattern by rotating the nozzle. It typically offers settings from approximately 0° ( a focused jet) to 60° (a wider fan spray).

Can I use any brand of detergent?

It is recommended to use detergents specifically designed for high-pressure washers to ensure optimal performance and prevent damage to the unit and surfaces.

What is the maximum water temperature the machine can handle?

The maximum water temperature the machine can handle is 50℃.

Is assembly difficult?

Assembly is required and involves connecting the hose, spray handle, and nozzle. The user manual provides step-by-step instructions. Basic tools may be needed, as indicated in the package contents.

What is the length of the power cord?

The product information specifies a 'Cable' is included, but the exact length of the power cord is not provided. Ensure you have an appropriate extension cord if needed for outdoor use.

How do I store the pressure washer?

Store the pressure washer in a dry place. It's recommended to disconnect hoses and coil them neatly. Ensure the unit is clean and dry before storage.

Troubleshooting

Pressure washer will not turn on.

Check that the power cable is securely plugged into a working electrical outlet. Ensure the trigger on the gun is being squeezed, as the motor will not run unless the trigger is engaged.

Low water pressure or weak spray.

Verify the water supply is adequate and the tap is fully open. Check the high-pressure hose and nozzle for any kinks or blockages. Ensure the detergent bottle is not obstructing the water flow. Clean any debris from the nozzle tip.

Detergent is not being dispensed.

Ensure the detergent bottle is correctly attached and filled with appropriate cleaning fluid. Check that the spray pattern is set to a setting that allows for detergent mixing. The machine typically follows a 'rinse-detergent-rinse' sequence, so detergent is not dispensed continuously.

Water leaks from connections.

Ensure all hose connections (water inlet, high-pressure hose, gun lance) are securely tightened. Check O-rings and seals for damage and replace if necessary.

Unit stops working during operation.

The motor may have overheated. Turn off the unit and allow it to cool down for at least 15-20 minutes before resuming operation. Check for any blockages in the water intake or spray nozzle.

Pros and Cons

Pros

  • Powerful 2000W motor for effective cleaning.
  • Includes detergent bottle for enhanced cleaning capabilities.
  • Portable design with wheels and handle for easy maneuverability.
  • Versatile with adjustable spray settings for different tasks.
  • Long 6m hose provides good reach.

Cons

  • Requires assembly before first use.
  • Not suitable for connection to potable water mains without approved hose-set.
  • Electrical supply connection must be made by a qualified person.
  • Can be noisy during operation.
  • Maximum water supply pressure is limited to 0.4MPa (4 bar).

Setup, Compatibility & Care

Setup:

  1. Attach the high-pressure hose to the water outlet on the machine.
  2. Connect the spray handle to the high-pressure hose.
  3. Mount the desired nozzle or accessory.
  4. Connect the machine to a water source and power supply.
  5. Ensure the machine is placed on a stable surface.

Compatibility:

  • Power Supply: Requires a 240V~50Hz power outlet.
  • Water Supply: Can connect to a standard water tap. Maximum allowable water supply pressure is 0.4MPa (4 bar). For safety, it's not intended for direct connection to potable water mains unless using an approved hose-set (IEC 61770).

Care:

  • Cleaning: Wipe the exterior with a damp cloth. Ensure the unit is unplugged and cool before cleaning.
  • Storage: Store in a dry, protected area. Ensure the high-pressure hose and cable are coiled neatly.
  • Maintenance: Periodically check the nozzle for blockages. Ensure all connections are secure before each use.
  • After Use: Turn off the motor and water supply, then squeeze the trigger to release residual pressure before disconnecting.
  • Safety Devices: Always ensure safety devices are functioning correctly before and after each use.