Callen 3 Light Flush Ceiling Light - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This contemporary semi-flush ceiling light from Poole Lighting Ltd is designed for homeowners seeking a stylish and modern lighting solution for their bedrooms, lounges, and hallways. Its key benefit is the elegant satin nickel finish with unique bubble-effect glass shades, offering a sophisticated ambiance. A minor caveat is that the G9 bulbs are not included and must be purchased separately.
All features
| Colour | Silver |
|---|---|
| Model Part Number | Ple2196 |
| Brand | Poole Lighting Ltd |
Extended Product Information
FAQs
What type of bulbs does this light use?
This light uses 3 x G9 light bulbs, with a maximum wattage of 28W per bulb.
Are the bulbs included with the light?
No, the G9 light bulbs are not included and must be purchased separately.
What is the finish of the light?
The light features a satin nickel finish.
Can this light be used with LED bulbs?
Yes, this light is dimmable and can be used with compatible dimmable LED G9 bulbs, provided they do not exceed the 28W maximum wattage.
What are the dimensions of the light?
The light has a projection of 16.3cm and a diameter of 35cm.
Is this light suitable for a bathroom?
This light is recommended for use in bedrooms, lounges, and hallways. Specific IP ratings for bathroom zones are not provided, so it is best suited for dry areas.
How do I clean the bubble effect glass shades?
Gently wipe the glass shades with a slightly damp, soft cloth and then dry them thoroughly with a clean, dry cloth. Avoid abrasive cleaners.
Troubleshooting
Light does not turn on
Ensure the power supply is on and the circuit breaker is not tripped. Verify that the G9 bulbs are correctly installed and not burnt out. Check all wiring connections if you are comfortable doing so, or consult a qualified electrician.
Flickering lights
This could be due to incompatible bulbs or a faulty dimmer switch. Try replacing the bulbs with new, compatible dimmable G9 bulbs. If the issue persists, the dimmer switch may need replacement.
Glass shades are loose
Gently tighten any retaining clips or screws that hold the glass shades in place. Do not overtighten, as this could damage the glass or fitting.
Pros and Cons
Pros
- Elegant and modern aesthetic
- Suitable for various room types
- Adjustable lighting with dimming capability
- Compact projection (16.3cm) for lower ceilings
- Quality satin nickel finish
Cons
- G9 bulbs are not included and must be purchased separately
- Requires 3 G9 bulbs, adding to the initial cost
- Bubble effect glass may not suit all decor styles
Setup, Compatibility & Care
Setup: Installation should be performed by a qualified electrician. Ensure the power is switched off at the mains before beginning. The light requires three G9 light bulbs with a maximum wattage of 28W each. These are not included.
Compatibility: This fixture is dimmable, so it is compatible with compatible LED or halogen dimmable bulbs and a dimmer switch. Always check bulb specifications for compatibility.
Care: To maintain the satin nickel finish, wipe clean with a soft, dry cloth. Avoid using abrasive cleaners or polishes, as these can damage the finish. For the glass shades, use a slightly damp cloth and dry thoroughly.