AB Tools Brake Calliper Piston Tool Kit - 21 Piece
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 21-piece brake caliper piston tool kit from AB Tools is designed for mechanics and DIY enthusiasts who need to service brake systems on a wide range of vehicles. Its primary benefit is preventing damage to seals, pistons, and boots during piston retraction, saving time and potential repair costs. A potential caveat is the need to identify the correct adaptor for your specific vehicle model. The kit offers a comprehensive set of tools for both left and right-handed applications, ensuring compatibility across many 2WD and 4WD vehicles.
All features
| Model Part Number | Au019 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What is the main purpose of this brake caliper piston tool kit?
The primary purpose is to safely and effectively retract brake caliper pistons when changing brake pads, preventing damage to the piston, seals, and boots.
Does this kit work on all cars?
The kit is designed for broad compatibility with most 2WD and 4WD vehicles. It includes many adaptors, but it's always best to check your vehicle's service manual if you are unsure about specific caliper types.
How do I know which adaptor to use?
The adaptors are labelled with numbers corresponding to specific vehicle makes, models, or caliper piston types. The kit also includes instructions to help you identify the correct adaptor for your application.
Can I use this kit for rear brakes as well as front brakes?
Yes, the kit is suitable for use on both front and rear brake caliper pistons, provided the correct adaptor is selected for the specific caliper.
What is the difference between the left-handed and right-handed thrust bolt assemblies?
These assemblies allow you to rotate the caliper piston in either direction (clockwise or counter-clockwise) to retract it, depending on the design of the caliper mechanism on your vehicle.
How should I store the tool kit?
The kit comes in a labelled blow-molded case. It is recommended to store all components in their designated spots within the case to keep them organized, protected, and easy to find.
Is this tool kit suitable for professional mechanics?
Yes, this kit is designed for both commercial (professional) and occasional (DIY) use, offering a comprehensive solution for brake servicing.
Troubleshooting
Tool does not fit caliper piston securely.
Ensure you have selected the correct adaptor for your vehicle's caliper piston type. Double-check the labels and vehicle service manual. Try a different adaptor if available for your vehicle.
Piston is difficult to retract.
Verify that the correct direction of rotation (clockwise or counter-clockwise) is being applied. Ensure the adaptor is seated fully and squarely on the piston. Clean the piston and caliper bore if excessively dirty.
Adaptor seems damaged or worn.
Inspect the adaptor for any signs of chipping, cracking, or excessive wear. If damage is found, do not use the adaptor to prevent further damage to the caliper or tool. Contact the manufacturer for replacement parts if available.
Case latch is broken.
Carefully store the tools to prevent loss. Contact the point of purchase or AB Tools for information on replacement cases or repair options.
Pros and Cons
Pros
- Wide compatibility across many vehicle makes and models.
- Reduces the risk of damaging brake components during service.
- Organized and portable storage case included.
- Suitable for both professional and home garage use.
- Includes both left and right-handed winding capabilities.
Cons
- Identifying the exact correct adaptor for specific vehicles may require consulting instructions or vehicle manuals.
- Not suitable for all specialized or older vehicle brake systems.
- Requires basic mechanical knowledge for effective use.
Setup, Compatibility & Care
Setup:
- Identify the type of brake caliper piston on your vehicle (e.g., single pin, multi-pin).
- Consult the provided instructions or the adaptor labels to select the most appropriate adaptor for your vehicle and caliper type.
- Attach the selected adaptor to the thrust bolt assembly.
- Engage the adaptor securely with the caliper piston.
- Use the provided handle or a suitable wrench to rotate the thrust bolt assembly, either clockwise or counter-clockwise as required, to retract the piston.
Compatibility:
This kit is designed for widespread compatibility with most 2WD and 4WD vehicles. However, always refer to your vehicle's service manual to confirm brake caliper specifications if unsure. Specific adaptors are labelled for common applications, including:
- General Motors vehicles (Labelled 0, 8, 9)
- European brands like VW, Audi, BMW, Fiat (various labels)
- Japanese brands like Nissan, Honda, Toyota, Mazda (various labels)
- Ford vehicles (various labels)
Care:
- After each use, clean the tools with a dry cloth to remove any brake dust or debris.
- Store all components back in their labelled positions within the blow-molded case.
- Keep the case in a dry environment to prevent corrosion.
- Periodically check the condition of the adaptors and thrust bolt for any signs of wear or damage.