Shopping.co.uk

Loctite Precision Glue 7.5G (12 Pack) - White

Not AvailableLoctite Precision Glue 7.5G (12 Pack) - White

Stock up on reliable, precision bonding with this Loctite Glue 12-pack, perfect for fast, clean, a...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This 12-pack of Loctite Precision Glue is ideal for frequent DIYers, crafters, and workshops needing a reliable, fast-acting adhesive. Its key benefit is the long precision nozzle for accurate, mess-free application on small surfaces. A minor caveat is that cyanoacrylate glues require careful handling and are not suitable for all material types.

All features

ColourWhite
BrandLoctite

Extended Product Information

FAQs

How long does it take for the glue to fully cure?

While the bond sets in seconds, full curing can take up to 24 hours, after which the bond reaches its maximum strength.

Can this glue be used on fabric?

It can bond some fabrics, particularly synthetic ones, but it may result in a stiff bond. It is not ideal for soft, flexible fabric applications.

What is the shelf life of the glue?

Unopened, the glue typically has a shelf life of 1-2 years when stored properly. Once opened, its shelf life is reduced, and it's best used within a few months.

Is this glue waterproof?

The cured adhesive offers some resistance to water, but it is not fully waterproof. Prolonged exposure to moisture may weaken the bond over time.

How do I remove dried glue from a surface?

For non-porous surfaces, try gently scraping with a razor blade or using acetone-based removers. For painted surfaces, test removers in an inconspicuous area first as they can damage paint.

Why is it called 'Precision Glue'?

It is named 'Precision Glue' due to its long, narrow nozzle designed for accurate and controlled application, allowing users to apply small amounts of adhesive exactly where needed.

Troubleshooting

Glue not dispensing

Ensure the cap is removed and the nozzle is not clogged. If clogged, carefully try to clear it with a fine needle or pin. Check that the tube is not empty.

Bond is weak or fails

Ensure surfaces were clean, dry, and free from contaminants. Reapply and ensure sufficient pressure is applied during the initial bond time. Check if the materials are compatible with cyanoacrylate glue.

Skin bonded together

Do not force skin apart. Soak the bonded area in warm, soapy water. Gently peel or roll the skin apart using a blunt edge like a spoon handle. Acetone (nail polish remover) can help dissolve the glue on skin, but use with caution and rinse thoroughly afterwards.

Glue dries cloudy

This can happen with excessive glue application or in humid conditions. Try applying a thinner layer in a drier environment for a clearer finish.

Pros and Cons

Pros

  • Offers exceptional value with a 12-pack supply.
  • Precision nozzle allows for accurate and controlled application.
  • Fast-acting formula speeds up repairs and assembly.
  • Dries clear for aesthetically pleasing results.
  • Versatile for bonding multiple common materials.

Cons

  • Cyanoacrylate adhesive can bond skin rapidly; requires careful handling.
  • Not suitable for porous materials like untreated wood or fabric without proper preparation.
  • Can become brittle over time or under extreme stress.
  • Shelf life may be limited once opened.

Setup, Compatibility & Care

Setup: No complex setup is required. Ensure the surfaces to be bonded are clean, dry, and free from grease or dust. Apply a thin layer of glue to one surface and press the parts together firmly. Hold for approximately 15-60 seconds until the bond sets.

Compatibility: Suitable for bonding plastic, wood, metal, rubber, leather, ceramic, and general household materials. *Avoid* using on polystyrene, polyethylene, or PTFE plastics. Always test on an inconspicuous area first if unsure.

Care: Store tubes in a cool, dry place away from direct sunlight and heat. Keep the cap tightly sealed after each use to prevent the nozzle from clogging and the glue from drying out. Clean the nozzle tip with a dry cloth if any dried glue appears. Ensure good ventilation when using.