Dylusions Shimmer Spray - Bubble-gum Pink - DYH60772

Currently unavailable

Currently unavailable
This guide is for paper crafters, journal artists, and mixed media enthusiasts looking to add vibrant, pearlescent color and shimmer to their projects. The key benefit is the easy application of a luminous, colorful finish that enhances various surfaces. A potential caveat is that the shimmer effect is most pronounced on lighter backgrounds. Dylusions Shimmer Sprays are pearlescent ink sprays designed to add color and shimmer to porous materials like paper, canvas, wood, and fabric.
| Model Part Number | DYH60772 |
|---|---|
| Brand | Dylusions |
Shake the bottle thoroughly before each use and spray lightly from a consistent distance (6-12 inches) onto a light-colored or porous surface. Layering over lighter colors or white surfaces often enhances the pearlescent glow.
Yes, Dylusions Shimmer Sprays can be used on fabric. The color and shimmer are permanent after drying, but test on a fabric scrap first to ensure desired results and check for washability.
Drying time varies depending on the surface and amount applied, but it typically dries to the touch within minutes. Full curing may take longer.
Yes, you can layer different Shimmer Spray colors or layer them over other Dylusions inks and paints to create unique luminous effects and complex backgrounds.
While the spray is water-resistant once dry, it is not completely waterproof. Heavy moisture may affect the finish over time.
It is not recommended for use on non-porous surfaces like glossy plastic, metal, or glass, as it may not adhere properly or may rub off easily.
Dylusions Shimmer Sprays are available in 12 coordinating colors.
Remove the nozzle and soak it in warm water. Rinse thoroughly before reattaching. Shake the bottle well.
Shake the bottle vigorously to ensure pigments are fully mixed. Hold the bottle at a consistent distance from the surface and use a steady sweeping motion.
Ensure the bottle has been shaken thoroughly. The pearlescent effect is best seen when sprayed lightly over a lighter background or over other colors.
Ensure you are using the spray on a porous surface and not applying too heavily. Allow adequate drying time in a well-ventilated area.
Setup: Ensure the spray nozzle is clear before first use. Shake the bottle well to disperse the pearlescent pigments. Hold the bottle approximately 6-12 inches away from your surface. Test spray on scrap material first.
Compatibility: Compatible with most porous surfaces including paper, cardstock, canvas, wood, and fabric. It can be layered over inks, paints, and other Dylusions products. Avoid use on non-porous surfaces where it may not adhere or dry properly.
Care: Store upright in a cool, dry place away from direct sunlight. Keep the cap tightly sealed when not in use to prevent drying. If the nozzle becomes clogged, remove it and soak it in warm water, then rinse thoroughly. Clean up any spills or overspray immediately with a damp cloth.