Liberon Hard Wax Oil - Clear Satin 1 Litre
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and enhance the natural beauty of their wooden surfaces using Liberon Hard Wax Oil. It's ideal for wooden flooring and furniture, offering superior protection against water, stains, and wear. Note that proper surface preparation is key to achieving the best results.
All features
| Model Part Number | 104467 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Can I use Liberon Hard Wax Oil on previously varnished wood?
No, you must remove the varnish by stripping or sanding the surface back to bare wood.
How many coats of Liberon Hard Wax Oil should I apply?
Apply two thin coats for optimal protection and finish.
How long should I wait between coats?
Allow the first coat to dry for 8 hours, then sand and apply the second coat. Wait 24 hours for the second coat to dry completely.
Can I use this product in a bathroom?
Yes, Liberon Hard Wax Oil is particularly well-suited for humid environments like kitchens and bathrooms.
How do I clean the treated surfaces?
Clean with a mild detergent and a damp cloth. Avoid abrasive cleaners.
What kind of wood can I use it on?
It is suitable for both soft and hardwoods.
How should I prepare the wood before application?
The wood must be bare, clean and dry. Sand lightly with 240 grit paper and remove all dust.
Troubleshooting
Oil is not drying properly.
Ensure proper ventilation and check the application thickness. Excessively thick coats may take longer to dry.
The finish is not smooth.
Sand lightly between coats using 240 grit sandpaper to remove any imperfections or raised grain.
Water is penetrating the surface.
Ensure that the wood was properly prepared and that two coats of oil were applied, allowing sufficient drying time.
The finish looks uneven.
Make sure you stir the oil well before use, apply it evenly, and sand lightly between coats.
Pros and Cons
Pros
- Provides long-lasting protection for wooden surfaces.
- Enhances the natural look of the wood.
- Easy to apply and maintain.
- Suitable for a variety of wooden surfaces, including floors and furniture.
- Resistant to water and stains, making it ideal for high-traffic areas and humid environments.
- Tools can be easily cleaned with water.
Cons
- Requires proper surface preparation, including sanding and cleaning.
- Drying time between coats can be lengthy.
- The final finish can vary depending on the wood type.
- May require multiple coats for optimal protection.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the wood is bare, clean, and dry. Remove any old varnish, paint, or wax by stripping or sanding. Clean and remove all dust.
- Oiled Wood: Lightly sand with 240 grit paper and remove all dust.
- Bare Wood: Clean and lightly sand with 240 grit paper, then remove all dust.
Application:
- Stir the contents of the tin well before use.
- Apply the first coat thinly with a brush or roller.
- Allow the first coat to dry for 8 hours.
- Sand lightly with 240 grit paper and remove all dust.
- Apply a second coat in the same manner.
- Allow the second coat to dry for 24 hours.
Compatibility:
Liberon Hard Wax Oil is compatible with both bare wood and previously oiled wood.
Care:
Clean the surface with a mild detergent and a damp cloth to maintain its finish. Avoid harsh chemicals.