Soluguard Woodworm and Rot Treatment - 5L Clear & Sprayer

Currently unavailable

Currently unavailable
This guide is for homeowners and DIY enthusiasts looking to protect their timber from woodworm and rot. Soluguard Woodworm & Rot Treatment provides effective protection, killing existing infestations and preventing future damage. A key benefit is its ready-to-use formulation, but users should ensure proper ventilation during application.
| Model Part Number | AM-SOLDUAL SPR |
|---|---|
| Brand | Soluguard |
Drying time can vary depending on the wood type and environmental conditions, but it generally takes between 12 to 24 hours.
Yes, once the treatment is completely dry, you can paint or apply other finishes. Always check the paint manufacturer's guidelines for compatibility.
The frequency of reapplication depends on the environmental conditions and the severity of infestation. Inspect the treated wood regularly, and reapply as needed, typically every 5-10 years, or if signs of re-infestation appear.
While the product is designed for use in homes, it's advisable to keep pets away from the treated area until it is completely dry. Ensure adequate ventilation to allow fumes to dissipate.
Wear appropriate protective gear, including gloves and eye protection. Work in a well-ventilated area. Avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water. Keep out of reach of children and pets.
Yes, Soluguard Woodworm & Rot Treatment can be used on exterior wood. However, it is advisable to apply a suitable topcoat, such as a wood stain or paint, to provide additional protection from the elements.
Coverage depends on the porosity of the wood. The 5L container will typically cover approximately 20-30 square meters, but this can vary. Always apply a sufficient amount to ensure complete penetration.
Check the sprayer for blockages. Ensure the tube is properly connected and that the nozzle is not clogged. If the problem persists, replace the sprayer.
Ensure that the wood surface has properly absorbed the treatment. This may require multiple coats on very porous or weathered wood. If the problem persists, consult a professional.
Ensure adequate ventilation during and after application. Allow sufficient time for the product to dry and the fumes to dissipate. If the odor is excessive or persists, contact a specialist.