ILFD Group Ltd Scrub Rider X6 Ride-On Floor Scrubber - X6
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The ILFD Group Ltd Scrub Rider X6 is designed for professionals managing large industrial and logistics environments, offering a powerful and reliable solution for efficient floor maintenance. Its key benefit lies in its high cleaning capacity and operational efficiency for extensive areas. A potential caveat is its size, requiring adequate space for operation and storage in such facilities.
All features
| Model Part Number | X6 |
|---|---|
| Brand | ILFD Group Ltd |
Extended Product Information
FAQs
What is the recommended cleaning solution for the Scrub Rider X6?
Use cleaning solutions specifically designed for industrial floor scrubbers. Always follow the dilution instructions provided by the solution manufacturer and avoid abrasive cleaners that could damage the floor or the machine's components.
How long does it take to charge the battery?
The charging time for the 100Ah lead-acid battery will vary depending on the charger used and the initial charge level. Typically, a full charge can take between 6-10 hours. It's recommended to charge the battery overnight for optimal performance.
What is the maximum area the X6 can clean on a single charge?
With an operating time of 2.5–3.5 hours and a cleaning speed of up to 7 km/h, the X6 can cover approximately 4280 m²/h. Therefore, on a full charge, it can clean up to 10,700 m² under ideal conditions.
Can the Scrub Rider X6 be used in wet environments?
The machine is designed for wet cleaning operations. However, it should not be submerged in water, and operators should exercise caution in excessively deep water to avoid damage to electrical components.
What maintenance is required for the battery?
The X6 comes with a maintenance-free lead-acid battery. While no regular watering is needed, ensure the battery terminals are kept clean and free from corrosion. Avoid overcharging or deep discharging the battery to prolong its lifespan.
How do I clean the squeegee?
After each use, wipe the squeegee blade clean with a damp cloth. Check for any embedded debris. Periodically inspect the squeegee for wear and tear, and replace the rubber blades if they become damaged or lose their effectiveness.
What is the warranty period for the Scrub Rider X6?
Please refer to the official ILFD Group Ltd documentation or your point of purchase for specific warranty details, as warranty periods can vary by region and supplier.
Troubleshooting
Machine not starting
Verify the battery is fully charged and properly connected. Ensure the emergency stop button is disengaged. Check that all covers and panels are securely closed.
Poor water pickup or streaking
Inspect the squeegee for damage or wear and replace if necessary. Ensure the squeegee is correctly adjusted and making full contact with the floor. Clean the water suction filter and check for blockages.
Brushes not rotating
Check for any obstructions around the brush motors. Ensure the brush engagement switch or lever is activated. Verify the motor brushes (if applicable and accessible) are not worn out.
Insufficient cleaning solution dispensed
Check the freshwater tank level and ensure it is adequately filled. Inspect the solution pump and lines for blockages or leaks. Verify the solution flow rate adjustment (if applicable) is set correctly.
Machine stops during operation
Check the battery charge level. The machine may have an overheat protection or low voltage cutoff; allow it to cool or recharge. Listen for any unusual noises that might indicate a mechanical issue.
Pros and Cons
Pros
- Excellent for large-scale industrial and logistics environments.
- High freshwater and dirty water tank capacities reduce downtime.
- Efficient cleaning coverage with a 530mm cleaning width.
- Durable and robust design suitable for demanding conditions.
- Relatively low noise level for an industrial machine.
Cons
- Requires significant space for operation and storage.
- 2.5-3.5 hour battery life may necessitate charging breaks during very long shifts.
- Initial investment may be higher compared to smaller cleaning equipment.
- Not suitable for confined or tightly packed spaces.
- Lead-acid battery requires standard maintenance procedures.
Setup, Compatibility & Care
Setup:
- Ensure the machine is placed on a level surface.
- Fill the freshwater tank (75L) with a suitable cleaning solution and water.
- Ensure the dirty water tank (85L) is empty and properly sealed.
- Connect the 100Ah maintenance-free battery charger and allow the battery to charge fully before first use.
- Inspect the disc brushes for any debris and ensure they are securely attached.
Compatibility:
The Scrub Rider X6 is designed for hard floor surfaces commonly found in industrial environments, such as concrete, epoxy, and sealed surfaces. It is not designed for use on carpets or uneven outdoor terrain.
Care:
- Daily: Empty and rinse the dirty water tank. Clean the squeegee and brushes. Wipe down the exterior of the machine.
- Weekly: Clean the freshwater tank. Inspect brushes and replace if worn. Check battery terminals for corrosion.
- Monthly: Inspect all hoses and connections for leaks or damage. Check water filters.
- Battery Care: Although maintenance-free, ensure the battery is kept charged and avoid prolonged periods of deep discharge. Follow manufacturer guidelines for charging cycles.