Ronseal Teak Oil 500ml - Clear
Not Available
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to maintain and protect their hardwood garden furniture using Ronseal Teak Oil. The primary benefit of using this product is its ability to nourish, protect, and enhance the wood, preventing splitting and greying. Keep in mind that regular application is needed to maintain the best results.
All features
| Model Part Number | 35819 |
|---|---|
| Brand | Ronseal |
Extended Product Information
FAQs
How often should I apply Ronseal Teak Oil?
For best results, reapply the oil as needed, typically every six months, or whenever the wood starts to look dry or weathered.
Can I use Ronseal Teak Oil on other types of wood?
This product is specifically designed for hardwood garden furniture. While it may work on other hardwoods, it's recommended to test it on a small, inconspicuous area first.
How do I clean the furniture before applying the oil?
Clean the furniture with a mild soap and water solution. Rinse thoroughly and allow it to dry completely before applying the oil.
How long does it take for the oil to dry?
The oil becomes water repellent and rainproof in about four hours, but it may take longer to fully dry and harden.
How much area does a 500ml can cover?
A 500ml can typically covers up to 5m² depending on the wood's condition and application method.
Can I apply this product in direct sunlight?
It is best to avoid applying the oil in direct sunlight, as it can cause the oil to dry too quickly and result in an uneven finish. Apply in shaded areas.
Troubleshooting
Oil not absorbing into the wood.
Ensure the wood is clean and dry before application. Lightly sand the surface if necessary to improve absorption.
Uneven finish after application.
Apply the oil evenly, following the wood grain. Wipe off any excess oil after a few minutes of application to avoid unevenness.
Furniture still looks grey after application.
The wood may be severely weathered. Multiple coats may be needed. Consider cleaning the furniture first to remove existing dirt and grime.
Pros and Cons
Pros
- Protects against splitting and greying of the wood.
- Enhances the natural appearance of hardwood furniture.
- Provides all-year-round protection for garden furniture.
- Easy to apply using a brush or cloth.
- Quickly becomes water repellent.
Cons
- Requires regular application for optimal results.
- May not be suitable for all types of wood.
- Coverage is up to 10m2 per litre, so multiple applications may be needed for large areas.
- Needs to be stored properly to maintain its properties.
Setup, Compatibility & Care
To apply Ronseal Teak Oil, ensure the surface is clean and dry. Use a brush or cloth to apply an even coat, following the wood grain. Allow the oil to penetrate the wood and dry for the recommended time (typically four hours before rainproof). For optimal results, apply multiple coats, allowing each coat to dry before applying the next. Compatibility is primarily with hardwood garden furniture. After application, clean your tools with a suitable solvent. Store the product in a cool, dry place and keep the container tightly closed to preserve its effectiveness.