Sangamo Choice Rstat3 Digital Electronic Room Thermostat - White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sangamo Choice Rstat3 Digital Electronic Room Thermostat is designed for homeowners seeking simple, accurate control over their heating systems. Its key benefit is providing clear digital feedback on temperature settings and operation, with a user-friendly dial for easy adjustment. A potential caveat for some users is its two-wire installation, which may require minor modification for three-wire systems.
All features
| Colour | White |
|---|---|
| Model Part Number | RSTAT3 |
| Brand | Sangamo |
Extended Product Information
FAQs
How do I set the temperature?
Simply turn the dial to your desired temperature. The digital display will show the selected temperature between 5°C and 30°C.
What type of batteries does it use?
It uses 2x AA Alkaline batteries (1.5V).
How long do the batteries last?
The batteries provide a power reserve of approximately one year under normal operation.
Can this thermostat be used with a combination boiler?
Yes, the Sangamo Choice Rstat3 features volt-free contacts, making it suitable for systems with either a combination or a normal boiler.
What if I have a three-wire installation?
For three-wire systems, you will need to cut back and make safe the neutral wire, ensuring only the two required wires are connected to the thermostat.
How do I switch between comfort and economy modes?
The thermostat automatically adjusts between comfort and economy based on the temperature setting. A lower dial setting typically corresponds to an economy mode, while a higher setting is for comfort.
Is this a programmable thermostat?
No, the Sangamo Choice Rstat3 is a non-programmable digital thermostat. It offers simple, manual control with a digital display.
Troubleshooting
Thermostat not turning on heating
Check that the batteries are correctly inserted and have sufficient charge. Verify the room temperature is below the set point. Ensure wiring connections are secure and correct for your system type.
Heating stays on constantly
Confirm the room temperature is actually below the set point. Check wiring connections. If the issue persists, there may be a fault with the thermostat or the heating system itself.
Digital display is blank
Replace the AA batteries. Ensure batteries are inserted with the correct polarity.
Inaccurate temperature readings
Ensure the thermostat is not located near heat sources (radiators, direct sunlight) or drafts, which can affect its sensor. Allow the thermostat time to acclimate to the room temperature after installation or battery change.
Pros and Cons
Pros
- Easy to install with a simple two-wire connection.
- Clear digital display provides accurate temperature feedback.
- Intuitive dial control for straightforward temperature adjustments.
- Offers both comfort and economy temperature settings for energy efficiency.
- Suitable for a wide range of heating systems due to volt-free contacts.
Cons
- May require modification for older three-wire installations.
- Relies on battery power, necessitating periodic battery replacement.
- Lacks advanced programming features found in more complex smart thermostats.
- Limited contact rating (3A, 250V AC) may not suit all high-power heating elements.
Setup, Compatibility & Care
Setup:
- Ensure power to your existing thermostat and heating system is switched off at the mains.
- Carefully disconnect the wires from your old thermostat. Note their positions.
- Connect the two wires from your heating system to the corresponding terminals on the Sangamo Rstat3. If you have a three-wire system, you will need to cut back and make safe the neutral wire, ensuring only the two required wires are connected.
- Install the thermostat onto the wall mounting.
- Insert 2x AA Alkaline batteries (1.5V).
- Restore power to your heating system.
Compatibility:
- Suitable for systems with either a combination or normal boiler.
- Operates with volt-free contacts.
- For three-wire installations, the neutral wire needs to be made safe.
Care:
- Clean the thermostat periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Replace batteries when indicated or annually to maintain the one-year power reserve.
- Ensure the thermostat is not obstructed by curtains or furniture, as this can affect temperature sensing.