Bartoline Ready Mixed Wallcovering Adhesive - White
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to achieve professional-looking results when wallpapering. Using Bartoline Ready Mixed Wallcovering Adhesive provides a strong, lasting bond for various wallpaper types, saving you the hassle of mixing. However, ensure proper surface preparation for optimal adhesion.
All features
| Colour | White |
|---|---|
| Model Part Number | RW0390 |
| Brand | Bartoline |
Extended Product Information
FAQs
What types of wallpaper can I use this adhesive with?
This adhesive is suitable for a wide range of wallpapers, including luxury vinyls (paper and fabric backed), hessians, covings, polystyrene tiles, veneers, embossed, and "paste the wall" types.
How much coverage can I expect from one tub?
A 2.5kg tub typically covers approximately 5 square meters.
Do I need to mix this adhesive?
No, Bartoline Ready Mixed Wallcovering Adhesive is ready to use straight from the tub.
Can I thin the adhesive?
Yes, you can thin the adhesive with water if necessary.
How do I clean up any spills?
Clean tools and any adhesive spills immediately with warm water.
Is this adhesive suitable for professional use?
Yes, the formulation is engineered towards the professional user.
What should I do if the wallpaper is not sticking?
Make sure your wall is properly prepared (clean, dry, and smooth). Apply a sufficient amount of adhesive, and ensure the wallpaper is pressed firmly.
Troubleshooting
Wallpaper not sticking to the wall.
Ensure the wall surface is properly prepared (clean, dry, and smooth). Apply a sufficient amount of adhesive and ensure the wallpaper is pressed firmly against the wall.
Air bubbles under the wallpaper.
Use a wallpaper smoother to push out any air bubbles from the center to the edges. Ensure the wallpaper is applied smoothly.
Adhesive is too thick.
Thin the adhesive with a small amount of water, mixing thoroughly, until the desired consistency is achieved.
Pros and Cons
Pros
- Ready-to-use formula saves time.
- Suitable for a wide range of wallpaper types.
- Provides a strong and lasting bond.
- Easy to reposition wallpaper during application.
- Offers excellent coverage per tub.
Cons
- Requires proper surface preparation for optimal results.
- May require thinning with water if needed.
Setup, Compatibility & Care
- Surface Preparation: Ensure the wall surface is clean, dry, and free from loose paint or wallpaper. Fill any holes or cracks and sand smooth.
- Application: Apply the adhesive evenly to the wall or the back of the wallpaper (depending on the type) using a brush or roller.
- Wallpaper Application: Carefully position the wallpaper and smooth out any air bubbles with a wallpaper smoother.
- Compatibility: Compatible with luxury vinyls (paper and fabric backed), hessians, covings, polystyrene tiles, and veneers.
- Thinning: If needed, thin the adhesive by adding water.
- Cleanup: Clean tools and any adhesive spills immediately with warm water.