Araldite Rapid Epoxy Adhesive - 2 X 15Ml Tubes (3 Packs)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Araldite Rapid Epoxy Adhesive is for DIY enthusiasts and homeowners needing quick, strong bonds on various materials like metal, wood, ceramics, glass, and plastics. Its key benefit is a fast-setting formula that allows for rapid repairs and projects, while a potential caveat is the need for precise mixing and application due to its quick cure time. This product offers a reliable two-part epoxy solution in a value multi-pack, ensuring you have enough adhesive for multiple tasks.
All features
| Brand | Araldite |
|---|
Extended Product Information
FAQs
What is the working time for Araldite Rapid Epoxy?
The working time is typically around 5 minutes, with handling strength achieved in about 20-30 minutes, and full cure occurring over several hours.
Can this adhesive be used for items that will be in contact with food?
This product is not specifically rated for food-safe applications. It is recommended to use food-safe adhesives for items that will come into direct contact with consumables.
How should I store the unused tubes?
Store the tubes in their original packaging in a cool, dry place. Ensure the caps are securely fastened to prevent contamination or drying out.
What is the shelf life of Araldite Rapid Epoxy?
The shelf life is typically around 2 years from the date of manufacture when stored correctly. Check the packaging for specific expiry dates.
Can I use this on flexible plastics like silicone or rubber?
It bonds to some rubbers and many plastics, but it is not ideal for very flexible materials like silicone or polyethylene. Test on a small, inconspicuous area first if unsure.
What is the color of the adhesive after it cures?
The cured adhesive is typically amber or translucent, offering a subtle finish for many applications.
How do I clean up spills?
Uncured adhesive should be wiped away immediately with a damp cloth. For stubborn residue, consult the product packaging for recommended cleaning agents, though scraping or sanding is often required once cured.
Troubleshooting
Adhesive not setting or bonding weakly
Ensure equal parts of resin and hardener were used and mixed thoroughly. Check that surfaces were clean and dry. Verify the adhesive has not exceeded its shelf life.
Adhesive sets too quickly to apply properly
Work in smaller batches. Ensure surfaces are prepared in advance. Apply adhesive quickly and bring parts together immediately after mixing.
Residue left on surfaces
Wipe away uncured adhesive immediately with a damp cloth. For cured residue, careful sanding may be required.
Tubes are difficult to open or dispense
Ensure the cap is fully removed and check for any hardened adhesive blocking the nozzle. Warm the tubes slightly in hand if very cold.
Pros and Cons
Pros
- Bonds quickly for efficient repairs.
- Forms a very strong and durable bond.
- Works on a wide variety of common materials.
- Convenient multi-pack offers good value.
- Suitable for both minor household fixes and larger projects.
Cons
- Requires accurate mixing of resin and hardener.
- Fast-setting nature leaves less time for repositioning.
- May not be suitable for extremely flexible materials.
- Cured adhesive can be amber/translucent, which may not suit all aesthetics.
- Requires adequate ventilation during use.
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or oil.
- For best results, lightly abrade smooth surfaces with sandpaper.
- Extrude equal amounts of resin and hardener onto a clean, disposable mixing surface.
- Mix thoroughly with a spatula or mixing stick until a uniform color is achieved.
- Apply the mixed adhesive to one surface.
- Press the parts together firmly and hold for the recommended time (typically a few minutes).
Compatibility:
This adhesive is suitable for use on metal, wood, ceramics, glass, rubber, and many plastics. Avoid use on polyethylene, PTFE, or silicone rubber.
Care:
- Store unused tubes in a cool, dry place, tightly capped.
- Clean up uncured adhesive immediately with a damp cloth or appropriate solvent (refer to packaging for specifics).
- Once cured, adhesive can be difficult to remove. Sanding or scraping may be necessary for removal.