CDA ECH93BL Chimney Cooker Hood - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users get the most out of their CDA ECH93BL Chimney Cooker Hood. Designed for kitchens needing effective ventilation, this hood extracts up to 468 m³/hr of air. However, it's important to note that the hood requires professional installation for optimal performance and safety. This guide will cover key features, usage, maintenance, and troubleshooting to ensure a clean and comfortable cooking environment.
All features
| Colour | Black |
|---|---|
| Energy Efficiency | C |
| Model Part Number | ECH93BL |
| Brand | CDA |
Extended Product Information
FAQs
How do I clean the grease filter?
Remove the grease filter and wash it in warm, soapy water or in a dishwasher. Ensure it is completely dry before reinstalling.
How often should I replace the charcoal filters?
Replace the charcoal filters every 3-6 months, depending on how frequently you use the hood.
What type of light bulbs does the hood use?
The hood uses LED lights. Refer to the manual for the correct replacement bulb type.
Can I use the hood without ducting?
Yes, you can use the hood in recirculating mode, but you will need to install charcoal filters (CHA37) to remove odors.
What is the recommended installation height above the hob?
The minimum installation height is 650 mm above electric hobs and 700 mm above gas hobs.
Where can I purchase replacement charcoal filters?
Replacement charcoal filters (CHA37) are available from most appliance retailers or online.
What is the extraction rate?
The maximum extraction rate is 468 m³/hr.
Troubleshooting
The cooker hood does not turn on.
Check the power supply and ensure the hood is properly connected to the electrical outlet. Check the fuse or circuit breaker.
The extraction power is weak.
Check and clean the grease filters. Make sure the ducting (if used) is not blocked. Check the charcoal filters (if used) and replace them if necessary.
The lights are not working.
Check the light bulbs and replace them if they are burnt out. Ensure the light switch is turned on.
The hood is noisy.
Ensure the hood is installed correctly. Clean or replace the grease filters. Check for any obstructions in the ducting (if used).
Odors are still present after cooking.
If using recirculating mode, replace the charcoal filters. Ensure the correct fan speed is selected for the type of cooking.
Pros and Cons
Pros
- High extraction rate for effective removal of cooking odors and smoke.
- Flexible installation options: ducted or recirculating.
- Energy-efficient LED lighting.
- Easy-to-use push button controls.
- Stylish black design.
- Aluminium grease filter is easy to clean.
Cons
- Requires professional installation.
- Charcoal filters (CHA37) are required for recirculating mode and need to be replaced periodically.
- Noise level can be noticeable at higher speeds (64 dBA at third speed).
- May not be suitable for very large kitchens without additional ventilation.
- Limited features compared to some higher-end models.
- No remote control included.
Setup, Compatibility & Care
- Installation: Professional installation is recommended to ensure safety and optimal performance. Ensure the hood is installed at the correct height above the hob: a minimum of 650 mm above electric hobs and 700 mm above gas hobs.
- Compatibility:
- Hob Compatibility: Compatible with both electric and gas hobs.
- Ducting: Requires a 150 mm outlet diameter for ducted installations.
- Recirculating: Requires CHA37 charcoal filters (2 are needed) for recirculating mode.
- Care:
- Grease Filter: The aluminium grease filter should be cleaned regularly (every 2-4 weeks) in warm, soapy water or a dishwasher to maintain its efficiency.
- Charcoal Filters: If using charcoal filters, replace them every 3-6 months, depending on usage.
- Exterior: Wipe the hood's exterior with a soft, damp cloth. Avoid abrasive cleaners.
- Lighting: Replace LED lights with the correct type if they burn out.