SmallRig V Mount Battery Adapter Plate with Dual Rod Clamp
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SmallRig 3498B V Mount Battery Adapter Plate is designed for filmmakers and content creators who need a robust and flexible power solution for their camera rigs. It allows you to power multiple accessories from a single V-mount battery, extending shooting time and reducing cable clutter. A potential caveat is its compatibility limitations with specific V-mount battery series.
All features
| Brand | SmallRig |
|---|
Extended Product Information
FAQs
What types of V-mount batteries are compatible?
The SmallRig 3498B is compatible with most standard V-mount batteries. However, it is not compatible with the PAGlink series V-mount batteries or the Patona Premium Battery for BP-190WS.
Can I power my camera and a monitor simultaneously?
Yes, you can power multiple devices. The adapter plate features an 8V DC port, a 12V DC port, and two 14.8V D-Tap ports, allowing simultaneous power distribution to your camera, monitor, and other accessories.
How do I attach this plate to my camera rig?
The plate comes with a 15mm Dual Rod Clamp that attaches to a standard 15mm LWS rod system. Secure the clamp to your rods, then attach the adapter plate to the clamp.
Does this adapter plate have a power switch?
Yes, it features an integrated power switch that controls all output ports, allowing for convenient power management and battery conservation.
Are screws and Allen wrench included?
Yes, the package includes the V Mount Battery Adapter Plate, a 15mm Dual Rod Clamp, an Allen Wrench, and four screws for mounting.
What are the dimensions and weight of the product?
The adapter plate itself measures 131.5mm in width, 108mm in height, and 30.2mm in depth. It weighs approximately 260g.
What is the purpose of the 1/4"-20 thread holes?
The 1/4"-20 threaded holes provide additional mounting points for attaching various camera accessories such as magic arms, articulating arms, or cold shoe mounts.
Troubleshooting
No power output from DC or D-Tap ports.
Ensure the V-mount battery is fully charged and correctly seated on the adapter plate. Verify that the power switch on the adapter plate is in the 'ON' position. Check that all connected cables are securely plugged into both the adapter plate and the accessories.
Battery not locking onto the adapter plate.
Ensure you are using a compatible V-mount battery. Check the V-mount contacts on both the battery and the plate for any obstructions or damage. Gently try to reseat the battery.
Loose connection on the 15mm rod clamp.
Use the included Allen wrench to tighten the screws on the 15mm Dual Rod Clamp. Ensure the rods are properly seated within the clamp before tightening.
Accessory (e.g., monitor) not powering on.
Confirm the accessory's power requirements match the output port voltage (8V DC, 12V DC, or 14.8V D-Tap). Ensure you are using the correct type of cable (DC to DC, D-Tap to DC, etc.) and that it is fully inserted.
Pros and Cons
Pros
- Provides extended camera and accessory runtimes via a single V-mount battery.
- Simultaneous powering of multiple devices through various output ports.
- Integrated rod clamp ensures a stable and integrated rig setup.
- Convenient power switch for efficient power management.
- Multiple 1/4"-20 mounting points offer flexibility for accessory attachment.
Cons
- Not compatible with PAGlink series V-mount batteries or Patona Premium Battery for BP-190WS.
- Requires a separate V-mount battery, adding to the overall cost and weight.
- May add bulk to very small camera setups.
Setup, Compatibility & Care Instructions
Setup:
- Mount the 15mm Dual Rod Clamp onto your 15mm LWS rod system attached to your camera.
- Slide the SmallRig V Mount Battery Adapter Plate onto the rod clamp and secure it.
- Attach your V-mount battery to the plate's V-mount interface until it clicks securely.
- Connect your camera, monitor, wireless transmitter, or other accessories to the appropriate DC or D-Tap ports using compatible cables.
- Attach any additional accessories to the 1/4"-20 threaded holes using compatible mounts.
Compatibility:
- V-Mount Batteries: Compatible with most standard V-mount batteries. *Not compatible* with PAGlink series V-mount batteries or Patona Premium Battery for BP-190WS.
- Camera Rigs: Designed for use with 15mm LWS rod systems.
- Accessories: Compatible with accessories requiring 8V DC, 12V DC, or 14.8V D-Tap power input.
Care Instructions:
- Keep the device dry. Do not expose it to damp environments to prevent short circuits.
- Clean the exterior with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Ensure all connections are secure before powering on your equipment.
- Periodically check the V-mount connection for debris and ensure a clean contact surface.