Lieber Downlight - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Lieber Anthracite GU10 downlight is ideal for homeowners and electricians seeking reliable, fire-rated lighting solutions for various interior spaces, particularly kitchens and bathrooms. Its key benefit is offering robust fire protection up to 90 minutes and an IP65 rating for moisture resistance at a competitive price. A caveat is that the GU10 bulb is not included and must be purchased separately. Key features include dual fire ratings (60 and 90 minutes), IP65 water resistance, easy installation with two connector clips, and suitability for ceiling thicknesses up to 30mm (extendable to 45mm).
All features
| Colour | Grey |
|---|---|
| Model Part Number | RL-LL-10-DLR001-1AN |
| Brand | LIEBER |
Extended Product Information
FAQs
Is a GU10 bulb included with the downlight?
No, the GU10 bulb is not included and must be purchased separately. Ensure the bulb does not exceed the maximum 35W rating.
What is the fire rating of this downlight?
This downlight has a dual fire rating, certified for 60 minutes and 90 minutes.
Can this downlight be used in a bathroom?
Yes, it is IP65 rated, making it suitable for use in Zone 1 of bathrooms and other damp environments.
What is the maximum ceiling thickness this downlight can fit?
The downlight is designed for ceilings up to 30mm thick, with springs that can be repositioned to accommodate ceilings up to 45mm thick.
Does this downlight require a transformer?
No, this Lieber downlight operates directly on a 220-240V power supply and does not require a separate transformer.
What is the cut-out size required for installation?
The required cut-out size for this downlight is 72mm in diameter.
What is the warranty period for this product?
The product comes with a 3-year guarantee.
Troubleshooting
Downlight not illuminating
Check that the power supply is on. Ensure the GU10 bulb is correctly seated and functional. Verify all wiring connections are secure.
Flickering light
The GU10 bulb may be loose; reseat it firmly. Ensure the bulb wattage does not exceed 35W. Check for loose wiring connections.
Downlight appears loose in ceiling
Verify the mounting springs are correctly positioned and fully engaged with the ceiling material. Ensure the cut-out size is correct for the fixture.
Not suitable for damp conditions despite IP65 rating
While IP65 rated, ensure the fixture is installed correctly according to instructions, and that the ceiling material itself is appropriate for a damp environment. Prolonged direct water jetting should still be avoided.
Pros and Cons
Pros
- Excellent fire safety with 60 and 90-minute ratings.
- High IP65 rating makes it suitable for wet areas like bathrooms.
- Easy to install with included connector clips.
- Adaptable to different ceiling thicknesses.
- Good value for a fire-rated and IP-rated downlight.
Cons
- GU10 bulb is not included, requiring an additional purchase.
- Maximum bulb wattage is limited to 35W.
- Requires a separate transformer for specific low-voltage setups (though this model states transformer not required for 220-240V).
Setup, Compatibility & Care
Setup:
- Ensure the main power supply is switched off at the breaker before installation.
- Cut the appropriate hole in the ceiling (72mm cut-out size).
- Connect the wiring to the two provided connector clips. This downlight operates directly on 220-240V and does not require a separate transformer.
- Adjust the mounting springs to suit your ceiling thickness (30mm standard, extendable to 45mm).
- Insert the downlight into the ceiling cut-out, allowing the springs to secure it in place.
- Install a suitable GU10 bulb (max 35W, not included).
- Restore power at the breaker.
Compatibility:
- Bulb Type: Requires a GU10 bulb (maximum 35W).
- Voltage: Compatible with 220-240V mains power.
- Ceiling Thickness: Fits ceilings from 30mm up to 45mm thick.
- Location: Suitable for indoor use, including Zone 1 of bathrooms and kitchens.
Care:
- Always ensure the power is switched off before cleaning.
- Wipe the downlight clean with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Periodically check the bulb seating and connections (when power is off).