Frenchic Funky Dora Wall Paint - Beige
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners seeking a durable, easy-to-use interior paint. The Frenchic Funky Dora Wall Paint offers an ultra-matte, scrubbable finish with excellent coverage and minimal prep, saving you time and effort. A potential caveat is its availability, which may be limited compared to broader market brands.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 39780692525143 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to use a primer with this paint?
No, Frenchic Funky Dora Wall Paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.
How durable is the finish?
The paint has an ISO11998 Class 1 Wet Scrub rating, making it highly durable and completely scrubbable once cured. This means it can withstand regular cleaning.
Is this paint safe for children's rooms?
Yes, it is EN71-3 certified, which means it is safe for use on children's toys, making it a safe choice for nurseries and playrooms. It is also low VOC and virtually odourless.
What surfaces can I use this paint on?
It is suitable for interior walls and ceilings, as well as wooden furniture, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, interior uPVC, and ceramic wall tiles (excluding very wet areas).
How much area does a 2.5l tin cover?
A 2.5l tin will cover up to 35m² with a single coat. For best results, two coats are recommended, meaning you can expect coverage of approximately 17.5m².
Can I match this paint to my trim and doors?
Yes, Frenchic offers a matching soft-satin Trim Paint range in the same colours, allowing you to coordinate your walls with skirting boards, doors, and frames.
How do I clean the painted surface?
Once fully cured, clean with a damp cloth. For tougher marks, use a mild soap solution. Avoid abrasive cleaners.
Troubleshooting
Paint is not covering well
Ensure the surface is properly prepared and not excessively porous. Apply a second coat. Stir the paint thoroughly before and during application.
Brush marks or roller texture are visible
Ensure you are using a high-quality brush or roller. Apply paint with consistent strokes and avoid overworking the paint. Allow sufficient drying time between coats.
Paint is peeling or flaking
The surface may not have been properly prepared. Ensure it was clean, dry, and free from any contaminants before painting. Remove loose paint, sand lightly, and reapply.
Paint has an uneven sheen
This can occur if the paint was not stirred thoroughly or if coats were applied unevenly. Ensure consistent application and adequate drying time. The ultra-matte finish can sometimes highlight inconsistencies if not applied carefully.
Pros and Cons
Pros
- Significantly reduces prep time due to self-priming and self-sealing properties.
- Durable and highly scrubbable finish is ideal for high-traffic areas and families.
- Low odour and low VOC content contribute to a healthier indoor environment.
- Excellent coverage means fewer coats are typically needed.
- The ultra-matte finish provides a modern and elegant look.
Cons
- Availability might be more limited than mass-market paint brands.
- May require more effort to achieve a perfect finish on very uneven surfaces compared to higher-sheen paints.
- Specific colour matching to other brands can be challenging.
- While suitable for many surfaces, it's not recommended for very wet areas like shower surrounds.
Setup, Compatibility & Care Instructions
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. For best results on particularly glossy or difficult surfaces, a light sanding may improve adhesion. This paint is self-priming, so no separate primer is required.
Application: Stir the paint thoroughly before use. Apply using a good quality brush or roller. Two coats are generally recommended for optimal colour depth and durability. Allow adequate drying time between coats as per manufacturer guidelines (typically 2-4 hours).
Compatibility: Suitable for interior walls and ceilings. Also applicable to wooden furniture, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, interior uPVC, and ceramic wall tiles. Not recommended for very wet areas such as shower enclosures or bath surrounds.
Care: Once fully cured (allow at least 7 days), the paint is completely scrubbable. Clean spills and marks promptly with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or excessive scrubbing, which can damage the finish.