The Ideal Standard Dual Flush Valve Seal and Clip (SV01967) is a genuine replacement component crucial for maintaining the efficiency and preventing leaks in specific Ideal Standard concealed cisterns. Designed to restore optimal flushing performance, this part ensures reliable operation and is backed by a manufacturer's guarantee. Users should note that its compatibility is limited to the listed Ideal Standard Conceala 2 models.
Genuine Ideal Standard Part: Ensures perfect fit, quality, and performance matching the original factory specifications.
Manufacturer's Guarantee: Provides peace of mind with a guarantee covering defects and ensuring product reliability.
Essential for Dual Flush Systems: Specifically designed to work with Ideal Standard dual flush mechanisms, supporting water efficiency.
Effective Leak Prevention: Forms a watertight seal at the base of the flush valve, preventing continuous water leakage into the toilet bowl.
Restores Flushing Efficiency: Replacing a worn seal can resolve issues like weak flushes or incomplete flushing cycles.
Model-Specific Compatibility: Engineered for precise integration with a range of Ideal Standard Conceala 2 cisterns.
Authentic Component: Guarantees compatibility and performance as it's an original Ideal Standard part.
Manufacturer Backing: Comes with a guarantee, ensuring quality and support.
Prevents Water Waste: Crucial for stopping leaks, which saves water and reduces utility bills.
Restores Functionality: Effectively solves common flush valve issues, extending the life of your cistern.
Easy to Source: A widely available genuine replacement part.
Limited Compatibility: Only fits specific Ideal Standard Conceala 2 cistern models, not universal.
Requires Installation: While straightforward, it does necessitate turning off water and accessing the cistern interior.
Wearable Part: Like all seals, it will eventually require replacement due to normal wear and tear.
Authentic Component: Guarantees compatibility and performance as it's an original Ideal Standard part.
Manufacturer Backing: Comes with a guarantee, ensuring quality and support.
Prevents Water Waste: Crucial for stopping leaks, which saves water and reduces utility bills.
Restores Functionality: Effectively solves common flush valve issues, extending the life of your cistern.
Easy to Source: A widely available genuine replacement part.
Limited Compatibility: Only fits specific Ideal Standard Conceala 2 cistern models, not universal.
Requires Installation: While straightforward, it does necessitate turning off water and accessing the cistern interior.
Wearable Part: Like all seals, it will eventually require replacement due to normal wear and tear.
The Ideal Standard SV01967 Dual Flush Valve Seal and Clip is a vital component for the proper functioning of your Ideal Standard concealed cistern. Its primary role is to create a secure, watertight barrier at the base of the flush valve, preventing water from slowly seeping from the cistern into the toilet bowl between flushes. This 'ghost flushing' not only wastes water but can also lead to higher water bills.
In practical terms, this seal ensures that when you press the flush button (either full or half flush), the valve opens cleanly to release water and then reseals completely, holding the next tank of water until needed. If your toilet is constantly refilling or you hear water running when it shouldn't be, replacing your old, worn, or perished seal with the SV01967 will likely resolve these issues, restoring your dual flush system to its intended water-saving performance.
For example, if you notice a continuous trickle of water in the toilet bowl, this seal is often the culprit. Its proper functioning is critical for both water conservation and the hygiene of your bathroom.
Replacing the Ideal Standard SV01967 Dual Flush Valve Seal and Clip is a manageable DIY task for most, though professional assistance can be sought if uncomfortable. Follow these general steps:
Turn off Water Supply: Locate the isolation valve for your toilet (usually near the base or behind the cistern) and turn it off. Flush the toilet to empty the cistern.
Access Cistern: Remove the cistern lid. You may need to disconnect the flush button/plate mechanism first.
Locate Flush Valve: Identify the flush valve assembly within the cistern, typically a large central unit.
Remove Old Seal: Depending on your specific flush valve model, the old seal will either be clipped onto the base of the valve or require the valve mechanism to be twisted and lifted slightly to access it. Carefully remove the old seal and clip.
Clean Area: Clean any debris, sediment, or limescale from the seating area where the seal rests.
Install New Seal: Position the new SV01967 seal and clip, ensuring it sits flat and securely on the flush valve's base. Make sure the clip is correctly attached.
Reassemble & Test: Reattach the flush valve mechanism (if removed), replace the cistern lid and flush button/plate. Turn the water supply back on and allow the cistern to refill. Check for leaks around the flush valve and ensure flushing operates correctly.
This seal and clip (SV01967) is specifically designed for use with the following Ideal Standard Conceala 2 cistern models:
Ideal Standard Conceala 2 Universal Height Cistern Bottom Inlet 6 Litre Flush
Ideal Standard Conceala 2 Cistern Bottom Inlet 6 or 4.5 litre flush
Ideal Standard Conceala 2 Cistern Side Inlet 6 litre flush
Ideal Standard Conceala 2 Cistern Top Inlet 6 or 4.5 litre flush
Ideal Standard Flush and Filling Valves (specific models)
Always verify your existing cistern model against this list to ensure proper fit.
Avoid Harsh Cleaners: Do not use abrasive or harsh chemical cleaners directly on the flush valve seal, as these can degrade the rubber over time.
Regular Inspection: Periodically, when cleaning the toilet or if you notice any unusual water sounds, visually inspect the seal for signs of wear, cracking, or mineral buildup.
Clean Sediment: If hard water is an issue, mineral deposits can build up around the seal. Gently clean with a mild descaling solution or white vinegar when replacing the seal to ensure optimal performance.