Greenbrook Lighting Connector - 3 Pole 20A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Greenbrook LCGN3P plug-in lighting connector is designed for electricians and DIY enthusiasts needing a simple, safe way to connect lighting circuits. Its key benefit is the quick and secure plug-and-socket solution, eliminating complex wiring. A potential caveat is that it is specifically designed for 220-240V AC systems, limiting its use in other voltage environments. The connector offers a 3-pole Single Pole and Neutral (SP&N) configuration for reliable electrical connections.
All features
| Model Part Number | LCGN3P |
|---|---|
| Brand | Greenbrook |
Extended Product Information
FAQs
What voltage is this lighting connector designed for?
This Greenbrook LCGN3P connector is designed for 220-240V AC systems operating at 50Hz.
What is the maximum current this connector can handle?
The connector has a maximum rating of 20 Amps.
Can this be used for outdoor lighting?
This connector is intended for indoor use. For outdoor applications, ensure you use a product specifically rated for outdoor and weatherproofing conditions.
Is this suitable for all types of lighting?
It is suitable for most standard domestic lighting circuits within its voltage and current rating. Always check the requirements of your specific lighting fixture.
Do I need an earth connection with this connector?
The connector itself is a 3-pole SP&N connector. Whether an earth connection is used depends on the wiring of the circuit and the lighting fixture it is connecting to. Ensure all necessary safety connections are made according to regulations.
How do I disconnect the lighting fixture?
Ensure the power is switched off at the source. Then, simply pull the plug and socket apart. For safety, always disconnect power before separating.
Troubleshooting
No power to the light.
Verify that the main power is switched on. Check that the plug is fully seated into the socket. Inspect wiring within the connector for loose connections.
Intermittent power supply.
Check for loose wire connections within the connector and the connected fixture. Ensure the connector is not overloaded beyond its 20A rating.
Connector feels warm during operation.
Immediately disconnect power. Check for loose connections or if the load exceeds the 20A rating. Consult a qualified electrician if the issue persists.
Pros and Cons
Pros
- Simplifies lighting installations and maintenance.
- Provides a secure and reliable connection.
- Reduces wiring time compared to traditional methods.
- Suitable for a wide range of lighting applications.
- Compact design for unobtrusive mounting.
Cons
- Limited to 220-240V AC systems.
- Requires a compatible socket for connection.
- May not be suitable for high-power industrial lighting.
- Requires basic electrical knowledge for safe installation.
Setup, Compatibility & Care
Setup: Ensure the power supply to the circuit is completely isolated before attempting any connection. Connect the appropriate wires (Live, Neutral, and Earth if applicable for the specific circuit configuration) to the designated terminals within the connector. Once wires are securely terminated, the plug and socket can be connected.
Compatibility: This connector is designed for 220-240V AC, 50Hz electrical systems. It is compatible with other components rated for 20A and the specified voltage. Ensure the connected lighting fixture is also rated appropriately.
Care: Periodically inspect the connector for any signs of damage, wear, or loose connections. Keep the connector clean and free from dust and moisture. Ensure connections remain secure. Always disconnect power before performing any maintenance or inspection.