Sentinel X800 Jetflo Ultimate Cleaner - 1L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sentinel X800 Jetflo Ultimate Cleaner is designed for homeowners and heating engineers seeking a rapid and effective solution to clean central heating systems. Its key benefit is the ability to remove corrosion and scale deposits in as little as 1 hour, significantly reducing system downtime. A potential caveat is that it should be used in accordance with system manufacturer guidelines. This advanced formula is compatible with all metal and alloy types, including aluminum, and utilizes cutting-edge chemical technology for fast action and efficient powerflushing.
All features
| Model Part Number | X800 |
|---|---|
| Brand | Sentinel |
Extended Product Information
FAQs
How long does Sentinel X800 take to work?
The new formula can remove corrosion deposits and scale in just 1 hour.
Can I use Sentinel X800 with aluminum radiators?
Yes, Sentinel X800 is suitable for all metal and alloy types, including aluminum.
Do I need to leave the heating on for the full hour?
Yes, circulation with the heating on ensures the cleaner reaches all parts of the system effectively.
What should I do after using Sentinel X800?
After the cleaning period, you must drain the system completely and flush it thoroughly with clean water. Finally, refill the system and add a suitable system inhibitor like Sentinel X100.
Is Sentinel X800 suitable for powerflushing?
Yes, its ability to dissolve corrosion debris makes it ideal for use before a powerflush.
What is the weight of the product?
The weight of the Sentinel X800 1L bottle is approximately 2.58 pounds.
Troubleshooting
Cleaner not circulating effectively
Ensure the pump is running and there are no airlocks in the system. Check that the system is adequately filled.
System still shows signs of blockage after cleaning
Repeat the cleaning process or consider a full powerflush. Ensure thorough flushing after the cleaning cycle to remove all debris.
Discoloration of system components
While Sentinel X800 is safe for all metals, severe pre-existing corrosion could lead to some aesthetic changes. Ensure the system is properly flushed and inhibited afterwards.
Pros and Cons
Pros
- Fast-acting formula cleans systems in as little as 1 hour.
- Effective on both corrosion deposits and scale.
- Safe for all common heating system metals, including aluminum.
- Can be used in cold systems, offering application flexibility.
- Reduces the need for extended circulation times during cleaning.
Cons
- Requires adherence to system manufacturer's guidelines for use.
- May require a system flush after use (standard procedure for cleaners).
- The 1L size is suitable for typical domestic systems; larger systems may require multiple units.
Setup, Compatibility & Care
Setup:
- Ensure the central heating system is isolated and drained to a suitable level for adding the cleaner.
- Add the appropriate amount of Sentinel X800 to the system (refer to product instructions for dosage based on system size).
- Refill the system with water and allow the cleaner to circulate for the recommended time, typically 1 hour, while the heating is on.
- After the circulation period, isolate the system again and drain all water.
- Thoroughly flush the system with clean water multiple times to remove all traces of the cleaner and dissolved debris.
- Refill the system and add a suitable system inhibitor, such as Sentinel X100.
Compatibility:
Sentinel X800 is compatible with all metal and alloy types found in central heating systems, including steel, copper, brass, and aluminum. It is suitable for use in both traditional vented and modern sealed systems.
Care:
Store the product in a cool, dry place, away from direct sunlight and out of reach of children. Ensure the container is tightly sealed when not in use. Dispose of empty containers responsibly according to local regulations.