Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Hudson Reed Fusion Vanity Unit is designed for modern bathrooms, offering substantial storage with four soft-close drawers and dual ceramic basins for shared or busy spaces. Its bleached oak woodgrain finish adds warmth and sophistication. While durable and easy to clean, users should note that basin taps and waste are sold separately.
| Colour | Brown |
|---|---|
| Model Part Number | CBI3032A |
| Brand | HUDSON REED |
No, basin taps and waste fittings are sold separately. You will need to purchase these to complete the installation.
The vanity unit is constructed from high-quality MFC (Melamine Faced Chipboard), known for its durability and resistance to moisture.
Clean the surface with a soft, damp cloth. Avoid abrasive cleaners. For tougher spots, use a mild soap solution and rinse thoroughly with a damp cloth, then dry completely.
The overall width is 1200mm. The vanity unit itself is 600mm wide (H:540mm x D:353mm) and the double ceramic basins together measure 1205mm wide (H:140mm x D:360mm).
No, this is a wall-hung vanity unit and is designed specifically to be mounted onto the wall.
The soft-close mechanism prevents drawers from slamming shut, contributing to a quieter bathroom environment and reducing wear and tear on the unit.
The vanity unit itself typically comes pre-assembled. However, installation involving plumbing and wall mounting requires professional fitting.
Check for obstructions within the drawer runners. Ensure the drawer is aligned correctly and not overloaded, which can affect the soft-close mechanism.
Verify that the basin waste fittings are correctly installed and not blocked. Ensure the connecting pipework is clear of debris.
The unit may not be securely fixed to the wall. Re-check all wall fixings and ensure they are appropriate for your wall type and properly tightened. Professional reassessment may be required.
Avoid using abrasive cleaning materials. Minor scratches can sometimes be minimized with specific MFC repair kits, but prevention by using coasters or mats is recommended.
Setup: This is a wall-hung unit and requires secure mounting to the wall. It is recommended that installation is carried out by a qualified plumber or bathroom fitter. Ensure the wall structure can support the weight of the unit when fully loaded. The unit comprises a 600mm vanity unit and 1200mm double basin, requiring appropriate plumbing connections for both basins and the unit's waste.
Compatibility: The vanity unit is designed to accommodate a range of basin taps. Please ensure any chosen taps are compatible with the pre-drilled tap holes on the ceramic basins. Basin waste fittings are sold separately and should be chosen based on the basin type.
Care: The MFC surface is designed for easy cleaning. Use a soft, damp cloth to wipe away spills and dust. Avoid abrasive cleaners or scouring pads, as these can damage the finish. For stubborn marks, a mild soap solution can be used, followed by a clean, damp cloth rinse and thorough drying with a soft cloth.
