Integral LED Evofire Mini Fire Rated Downlight - White - 55mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This white Integral LED Evofire Mini downlight is designed for users seeking a discreet and highly durable lighting solution for both residential and commercial spaces. Its key benefit lies in its robust fire rating and IP65 protection, making it ideal for areas prone to moisture or fire concerns. A potential caveat is its small 55mm diameter, which might require careful consideration for existing larger cutouts. This downlight features an ultra-thin bezel for a seamless look and a patented design for enhanced lamp longevity through improved heat dissipation.
All features
| Colour | White |
|---|---|
| Model Part Number | ILDLFR43D060 |
| Brand | Integral LED |
Extended Product Information
FAQs
What size hole do I need to cut for this downlight?
The Integral LED Evofire Mini downlight typically requires a cutout diameter of approximately 45-50mm. It is always best to consult the product's specific installation instructions or template for precise measurements.
Does this downlight come with a bulb?
No, this downlight is a fixture and requires a compatible LED lamp to be purchased separately.
Can I use this in a bathroom?
Yes, with its IP65 rating, it is protected against dust and water jets, making it perfectly safe and suitable for installation in bathrooms and other moisture-rich environments.
How long is the fire rating effective for?
This downlight is certified for fire resistance for 30, 60, and 90 minutes, providing significant protection for your ceiling structure.
What is the benefit of the ultra-thin bezel?
The ultra-thin 1mm bezel provides a very discreet and modern look, blending seamlessly into the ceiling surface with minimal visual impact.
Can I replace the LED lamp easily?
Yes, the downlight is designed for easy lamp replacement. Simply remove the downlight from its housing (ensure power is off), access the lamp holder, and replace the bulb with a compatible LED.
Is this downlight dimmable?
The dimmability of the light depends entirely on the LED lamp you choose to install. Ensure you select a dimmable LED lamp and a compatible dimmer switch for your system.
Troubleshooting
Downlight not illuminating
Check that the power supply is switched on at the mains. Verify all wiring connections are secure and correctly made to the loop-in/loop-out terminal block. Ensure the compatible LED lamp is correctly seated and functional.
Flickering light
This is often related to the connected LED lamp. Try replacing the LED lamp with a known compatible and functional unit. Check wiring for loose connections.
Reduced brightness or premature lamp failure
Ensure the downlight is not being obstructed, allowing for proper heat dissipation. Confirm that the connected LED lamp is rated for use in enclosed fixtures and is not exceeding its recommended operating temperature. Verify the lamp is correctly installed.
Downlight feels excessively hot
While designed for heat dissipation, excessive heat may indicate an issue. Check that the connected LED lamp is suitable and not drawing too much power. Ensure there is adequate ventilation around the fitting in the ceiling void if possible, and that the patented open design is not blocked.
Pros and Cons
Pros
- Excellent safety features with multi-level fire rating.
- High level of dust and water protection (IP65).
- Subtle and modern appearance due to the ultra-thin bezel.
- Promotes longer lamp life through effective heat management.
- User-friendly installation process.
- Suitable for challenging environments like bathrooms.
Cons
- Small 55mm diameter may not fit larger pre-existing holes without adapters.
- Requires a compatible LED lamp to be purchased separately.
- The white finish might show dirt more readily in very dusty environments compared to darker options.
Setup, Compatibility & Care
Setup: Ensure the power is switched off at the mains before commencing installation. Use the provided loop-in/loop-out terminal block for connecting the power supply. The downlight requires a specific cutout diameter, typically around 45-50mm (refer to manufacturer's template if provided). Connect the live, neutral, and earth wires according to standard electrical practice. Once wired, push the downlight into the ceiling cutout, allowing its spring clips to secure it in place.
Compatibility: This downlight is designed to house compatible LED lamps. It is crucial to use LED lamps only, as traditional halogen or incandescent bulbs can generate excessive heat, potentially damaging the fitting and compromising safety features. Ensure the chosen LED lamp's diameter and length are suitable for the downlight's housing. The fixture is compatible with standard mains voltage (220-240V).
Care: To maintain the appearance and performance of the downlight, clean it periodically with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and the integrity of the unit. Ensure the downlight remains unobstructed to allow for optimal heat dissipation.