VersaChem Windshield & Glass Sealer - 1.5oz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The VersaChem Flowable Windshield Silicone is for DIY enthusiasts and professionals needing to create durable, airtight seals on automotive glass and other surfaces. Its key benefit is its ability to flow into small cracks and form a clear, flexible, and weather-resistant barrier, ensuring reliable repairs. A caveat is that it requires a full 24-hour cure time for maximum strength and durability. This specialized adhesive is designed to bond to glass, metal, wood, plastic, concrete, and rubber, making it a versatile solution for sealing and repairing windshields, sunroofs, and headlamp assemblies.
All features
| Model Part Number | 75009 |
|---|---|
| Brand | Versachem |
Extended Product Information
FAQs
What is the main advantage of a 'flowable' silicone sealer?
A flowable sealer is designed to actively move into small cracks and imperfections, ensuring a more complete and thorough seal compared to non-sagging sealants.
How long does it take for the VersaChem Windshield & Glass Sealer to fully cure?
The product has a set time of 1 hour and requires a full 24 hours to cure completely for maximum strength and durability.
Can this sealer be used on painted surfaces?
While it adheres to many materials, test adhesion on a small, inconspicuous area of painted surfaces first, as some paints may not provide an ideal bonding surface.
What is the temperature range for this product's performance?
The VersaChem Windshield & Glass Sealer performs reliably in temperatures ranging from -80°F to 450°F.
How should I clean up uncured sealer?
Uncured sealant can typically be wiped away with a cloth dampened with mineral spirits or a similar appropriate solvent.
Is this product suitable for exterior use?
Yes, it is resistant to weather, making it suitable for exterior applications like sealing windshields and sunroofs.
Can I paint over the cured sealant?
This silicone sealant is generally not recommended for painting over. Its flexible nature may cause paint to crack. It is designed to provide a clear, finished seal.
Troubleshooting
Sealer is not flowing properly.
Ensure the nozzle is properly cut or punctured. If the product has been stored for an extended period, viscosity may increase; warm gently if necessary, but avoid overheating.
Poor adhesion to the surface.
Verify that the surface was thoroughly cleaned, dried, and free from contaminants like oil or wax before application. Lightly abrading smooth surfaces can improve adhesion.
Seal remains tacky after 24 hours.
Ensure proper application thickness and that conditions (temperature and humidity) are within the recommended range for curing. Thick applications or extreme environmental conditions can prolong cure time.
Material drips excessively during application.
Apply more slowly and carefully, especially on vertical or overhead surfaces. Use a smaller bead size or temporarily support the material until it begins to set.
Pros and Cons
Pros
- Excellent adhesion to multiple surfaces.
- Flows easily into cracks for a complete seal.
- Creates a durable, weather-resistant barrier.
- Suitable for a wide range of automotive and general repair applications.
- Withstands extreme temperatures and shop chemicals.
Cons
- Requires a full 24-hour cure time for optimal performance.
- Flowable nature may require careful application to avoid drips on vertical surfaces.
- 1.5oz size may be insufficient for very large repair areas.
- Clean-up of uncured product may require specific solvents.
Setup, Compatibility & Care
Setup:
- Ensure the surfaces to be sealed are clean, dry, and free from grease, oil, and dirt. For best adhesion, lightly abrade smooth surfaces.
- Puncture the seal on the applicator tip or cut to the desired bead size.
- Apply the silicone directly into the crack or gap, allowing its flowable nature to fill the area.
- Smooth any excess material if necessary before it begins to set.
Compatibility:
This product is compatible with glass, metal, wood, plastic, concrete, and rubber.
Care:
- Uncured product can be wiped away with a cloth dampened with mineral spirits or a similar solvent.
- Cured product can be removed mechanically (scraping) or by using specialized silicone removers.
- Store in a cool, dry place away from direct sunlight.