Lineco PVA Glue Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Lineco PVA Glue Adhesive is designed for professionals and hobbyists who need a reliable, acid-free adhesive for paper-based projects. Its key benefit is excellent lay-flat properties and a clear, fast-setting finish, ideal for mounting, repairing, and preserving items like photos and prints. A minor caveat is that it's specifically formulated for paper and may not be suitable for all materials.
All features
| Colour | White |
|---|---|
| Model Part Number | 9011007 |
| Brand | Lineco |
Extended Product Information
FAQs
Is this glue truly archival?
Yes, the Lineco PVA Glue Adhesive is formulated with a neutral pH and is acid-free, making it suitable for archival applications and long-term preservation of paper items.
How long does it take to dry?
It is a fast-setting adhesive, typically achieving handling strength within minutes. Full cure time may vary depending on application thickness and environmental conditions, but it is designed for efficient project completion.
Can I use this for repairing book bindings?
Yes, this PVA glue is ideal for repairing paper-based book bindings, reinforcing signatures, and reattaching loose pages due to its flexibility and strong bond on paper.
Will this glue damage photographs?
No, the acid-free and neutral pH formulation is specifically designed to be safe for mounting and preserving photographs without causing damage or discoloration over time.
How should I clean up the glue?
While the glue is wet, it can be easily cleaned with a damp cloth or sponge. Dried glue may be more difficult to remove and should be handled carefully to avoid damaging the substrate.
What is the shelf life of this adhesive?
When stored properly in a sealed container in a cool, dry place, the PVA glue typically has a shelf life of several years. Always check for consistency and odor changes as indicators of potential degradation.
Can I use this on fabric or wood?
This adhesive is specifically formulated for paper and porous paper-like materials. It is not recommended for use on fabric, wood, plastic, or metal surfaces.
Troubleshooting
Glue is too thick or stringy
Ensure the lid is sealed when not in use to prevent drying. If slightly thickened, a tiny amount of distilled water can be mixed in, but use sparingly to maintain adhesive strength.
Paper is wrinkling or buckling
Apply a thinner, more even coat of adhesive. Ensure the paper is properly supported during application and drying, perhaps by using a press or weights once adhered.
Adhesive is not bonding strongly
Ensure both surfaces are clean, dry, and free of dust or grease. Apply adhesive to one surface and press firmly, holding until initial tack is achieved. Allow adequate drying time.
Yellowing of adhered paper over time
This is unlikely with a properly stored acid-free PVA. Ensure the product has not expired and has been stored correctly. Avoid exposure to UV light.
Pros and Cons
Pros
- Archival quality, safe for valuable documents and photos
- Dries clear and maintains the appearance of the artwork/document
- Fast-setting nature speeds up project completion
- Good for preventing paper distortion (lay-flat properties)
- Suitable for a wide range of paper-based repairs and mounting
Cons
- Primarily for paper-based materials; may not adhere well to other surfaces
- Requires proper application technique to achieve best lay-flat results
- As with most liquid glues, can be messy if over-applied
Setup, Compatibility & Care
Setup: This adhesive is ready to use straight from the container. No mixing or preparation is required. Apply a thin, even layer using a brush, roller, or a dedicated applicator for best results.
Compatibility: Primarily designed for use with paper, cardstock, photographs, and other cellulose-based materials. It is not recommended for bonding plastics, metals, fabrics, or porous surfaces other than paper. Always test on a small, inconspicuous area if unsure about material compatibility.
Care: Store the glue in its original container with the lid tightly sealed in a cool, dry place, away from direct sunlight and extreme temperatures. Clean up any spills or excess adhesive immediately with a damp cloth or sponge while the glue is still wet. Dried adhesive may be difficult to remove and could potentially damage surfaces if aggressive cleaning methods are used.