Godox V1 Round Camera Flash - Canon
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Godox V1 is a powerful and versatile round camera flash designed specifically for Canon cameras, offering photographers soft, even lighting with its unique round head. It's ideal for event, portrait, and on-location photography, providing up to 480 full-power flashes on a single charge. However, understanding its features and proper usage is key to maximizing its benefits, so this guide provides all the information needed to get started.
All features
| Brand | Godox |
|---|
Extended Product Information
FAQs
How long does the battery last?
The Godox V1 can provide up to 480 full-power flashes on a single charge.
What is the recycling time?
The recycling time is approximately 1.5 seconds at full power.
Does the V1 support High-Speed Sync (HSS)?
Yes, the V1 supports HSS up to 1/8000 second.
Is the flash head rotatable and tiltable?
Yes, the flash head rotates 330 degrees and tilts from -7 to 120 degrees.
What is the benefit of the round flash head?
The round flash head provides soft, smooth light with a natural-looking falloff, which is ideal for portraits and flattering results.
Can I use the Godox V1 off-camera?
Yes, the V1 has a built-in 2.4 GHz receiver for wireless triggering and control with the Godox X System.
What kind of battery does the V1 use?
It uses a removable 7.2V / 2600mAh lithium-ion battery.
What accessories are compatible with the V1?
The V1 has a magnetic surface for quickly attaching Godox light modifiers.
Troubleshooting
Flash not firing.
Ensure the flash is securely mounted on the camera, the battery is charged, and the flash is set to the correct mode. Check that the camera's flash settings are enabled.
Flash is underexposing or overexposing.
Adjust the flash exposure compensation (FEC) on the flash or in your camera settings. Ensure the flash is correctly set to E-TTL or manual mode.
Wireless triggering not working.
Confirm that the V1 and the Godox X system transmitter (if used) are on the same channel and group. Make sure the transmitter is properly mounted and transmitting.
Slow Recycling Time.
Allow the flash to cool down. If the battery is old or not fully charged, replace it with a fresh one.
Pros and Cons
Pros
- Soft, even light output due to the round flash head.
- Fast recycling time, enabling you to capture more shots in rapid succession.
- Wireless triggering and control with the Godox X System.
- Long battery life, allowing for extended shooting sessions.
- Compatible with Canon's E-TTL system for automatic metering.
Cons
- Requires using a Godox transmitter for off-camera flash control, if not already part of your setup.
- Round flash head may require a slight adjustment in your typical light modification approach.
- The initial setup process might require learning the specific Godox menu and system.
- Some users may find the interface less intuitive than Canon's proprietary flashes.
Setup, Compatibility & Care
Setup
- Attach the Flash: Mount the V1 onto your Canon camera's hot shoe.
- Insert Battery: Insert the fully charged lithium-ion battery into the flash.
- Power On: Turn on the flash using the power button.
- Set Camera and Flash Modes: Set your camera to the appropriate flash mode (e.g., E-TTL) and configure flash settings on the V1.
- Test the Flash: Take a few test shots to ensure proper exposure and flash functionality.
Compatibility
The Godox V1 is compatible with Canon cameras and supports E-TTL / E-TTL II.
Care
- Cleaning: Use a soft, dry cloth to clean the flash body. Avoid using harsh chemicals.
- Storage: Store the flash in a cool, dry place when not in use.
- Battery: Remove the battery if the flash will not be used for an extended period.