SmallRig Magic Arm with Crab Clamp Kit - SmallRig
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SmallRig 4766 Magic Arm with Crab Clamp Kit is designed for creators working with lightweight devices like smartphones, webcams, and action cameras. Its primary benefit is providing a versatile and secure mounting solution with an extended reach, allowing for flexible positioning. A key consideration is its weight capacity, which is limited to 0.25kg (8.8oz), making it unsuitable for heavier camera setups.
All features
| Brand | SmallRig |
|---|
Extended Product Information
FAQs
What is the maximum weight capacity of the SmallRig 4766 kit?
The kit is designed to support lightweight devices and has a maximum weight capacity of 0.25kg (8.8oz).
What is the length of the magic arm?
The adjustable magic arm extends to 56cm (22 inches).
Can I mount a microphone to this kit?
Yes, the kit includes a 1/4"-20 to 3/8"-16 thread adapter that can be used to mount compatible microphones.
What types of surfaces can the crab clamp attach to?
The crab clamp is designed to grip flat surfaces and cylindrical objects, with silicone pads to prevent damage and improve grip.
What is the width range for the phone holder?
The phone holder is designed to accommodate smartphones with a width ranging from 7.0cm to 10.0cm (2.7 to 3.9 inches).
Is this kit suitable for heavier cameras like DSLRs?
No, the kit has a strict weight limit of 0.25kg (8.8oz) and is intended for lightweight devices such as smartphones, action cameras, and webcams.
How do I clean the product?
Clean the aluminum alloy parts with a soft, dry cloth. Avoid using harsh or abrasive cleaning agents.
Troubleshooting
Device wobbles or slips
Ensure the ball head locking knob on the magic arm is tightened securely. Check that the anti-skid rubber washers are in place. Verify the crab clamp is firmly attached to its mounting surface and not slipping.
Crab clamp won't grip surface securely
Ensure the surface is clean and free of dust or grease. Adjust the swivel tips of the crab clamp to maximize contact. Do not force the clamp beyond its designed range.
Magic arm is difficult to adjust
Loosen the main locking knob sufficiently before attempting to adjust the arm's position. Then, tighten the knob firmly once the desired position is achieved.
Phone holder is too loose or too tight
Adjust the tension of the phone holder mechanism by hand. If it feels loose, ensure your phone is within the 7.0-10.0cm width range. If too tight, carefully release the tension.
Pros and Cons
Pros
- Offers significant reach with the 56cm magic arm.
- Secure and non-damaging grip on various surfaces thanks to the crab clamp's design.
- Stable mounting for lightweight devices due to the ball head's friction washers.
- Versatile for smartphones, webcams, and action cameras.
- Includes an adapter for audio accessories, enhancing its utility for podcasters and streamers.
Cons
- Limited weight capacity of 0.25kg (8.8oz) is not suitable for heavier cameras.
- The two-section arm, while flexible, might introduce slight wobble if not properly secured.
- Maximum clamp opening size is not specified, limiting its application on very thick objects.
- Requires careful tightening to ensure stability, especially at full extension.
Setup, Compatibility & Care
Setup:
- Attach the magic arm to the crab clamp using the anti-deflection 1/4"-20 threaded screw. Tighten securely.
- Adjust the crab clamp's jaws to grip the desired surface. Ensure the silicone pads make contact for a stable hold.
- Mount your device (smartphone, webcam, action camera) onto the designated holder or via a 1/4"-20 thread.
- Use the ball head on the magic arm to adjust the angle and position of your device. Tighten the locking knob firmly.
- If mounting a microphone, use the included 1/4"-20 to 3/8"-16 thread adapter.
Compatibility:
- Devices: Smartphones (7.0-10.0cm width), action cameras, webcams, and other accessories with a 1/4"-20 or 3/8"-16 thread (using adapter).
- Mounting Surfaces: The crab clamp is suitable for flat surfaces and cylindrical objects within its clamping range (maximum opening not specified, but designed for typical desk edges, poles, etc.).
- Weight Limit: Maximum supported weight is 0.25kg (8.8oz). Do not exceed this limit.
Care:
- Clean the aluminum alloy parts with a soft, dry cloth. Avoid abrasive cleaners.
- Periodically check the tightness of all screws and knobs to ensure continued stability.
- Ensure the silicone pads on the crab clamp are free of debris to maintain grip.
- Store in a dry place away from extreme temperatures.