Inner Tube - 80/90-16
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for owners of motorcycles or scooters requiring an 80/90-16 inner tube. Its key benefit is providing a reliable seal for your wheel. A potential caveat is ensuring correct sizing before purchase. This inner tube features a Schrader (car type) valve and is designed for 16-inch wheel rims, with a valve overall length of 29.71 mm, suitable for tire sizes within the 80/90-16 range.
All features
| Model Part Number | 37902 |
|---|---|
| Brand | PetrolScooter |
Extended Product Information
FAQs
What type of valve does this inner tube have?
This inner tube features a Schrader valve, commonly known as a car-type valve.
What tire size is this inner tube designed for?
It is designed for tire sizes in the 80/90-16 range.
What wheel rim size is compatible with this inner tube?
This inner tube is compatible with 16-inch wheel rims.
Can I use this inner tube in a tubeless tire?
This inner tube is intended for tube-type tires. Using it in a tubeless setup requires specific rim compatibility and may not be safe or effective.
How often should I check the tire pressure?
It is recommended to check tire pressure at least once a month, and before long journeys. Always refer to your vehicle manufacturer's recommendations for optimal pressure.
What is the overall length of the valve stem?
The overall length of the valve stem is 29.71 mm.
Troubleshooting
Inner tube won't hold air
Check for pinches where the tube meets the rim or tire bead. Inspect the valve stem for proper seating and any damage. Ensure the valve core is tightened.
Tire feels consistently low on pressure
Check for slow leaks by submerging the inflated wheel in water and looking for bubbles. Inspect the entire tire for small punctures or embedded objects. Re-check valve stem seal.
Difficulty installing the valve stem
Ensure the valve stem hole on the rim is clean and free of burrs. Slightly inflate the tube to help position it correctly before mounting the tire.
Pros and Cons
Pros
- Features a universally recognized Schrader valve.
- Designed for a specific, common tire size (80/90-16).
- Suitable for 16-inch wheel rims.
- Offers a straightforward replacement for damaged or worn inner tubes.
Cons
- Requires careful measurement to ensure correct tire size compatibility.
- Not suitable for tubeless tires unless used with a compatible rim and valve stem setup.
- Valve angle is straight, which may not be ideal for all rim designs.
- Potential for damage if not installed correctly.
Setup, Compatibility & Care
Setup: To install the inner tube, first dismount the tire from the wheel rim. Insert the valve stem of the new inner tube through the designated hole in the rim. Partially inflate the tube to give it shape, then carefully position it inside the tire. Mount the tire back onto the rim, ensuring the inner tube is not pinched between the tire bead and the rim. Finally, inflate the tire to the recommended pressure and remount the wheel onto the vehicle.
Compatibility: This inner tube is specifically designed for tire sizes 80/90-16 and wheel rims of 16 inches. It uses a Schrader valve, which is compatible with standard automotive tire inflators. Always verify that your tire and rim are designed to be used with an inner tube (tube-type) and not a tubeless setup.
Care: Regularly check tire pressure using a reliable gauge. Avoid over or under-inflation. Inspect the tire for any embedded objects, cuts, or bulges that could indicate damage to the inner tube. Clean the exterior of the tire and valve stem occasionally. Store spare tubes in a cool, dry place away from direct sunlight and sharp objects.