UltraTile Prorapid Rs Rapid Set Flexible Tile Adhesive - Grey

Not Available UltraTile Prorapid Rs Rapid Set Flexible Tile Adhesive - Grey

UltraTile ProRapid RS is a single part, rapid setting, flexible adhesive for wall and floor tiles....

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone using UltraTile ProRapid RS, a rapid-setting, flexible adhesive. It allows for the quick and efficient installation of ceramic, porcelain, and natural stone tiles, with light foot traffic possible in as little as 3 hours. Keep in mind the setting time is dependent on temperature and substrate conditions.

All features

Colour	Grey
Brand	UltraTile

Extended Product Information

FAQs

How long is the pot life?

The pot life is 60 minutes, giving you ample time to apply the adhesive.

How long does it take for the adhesive to set?

The set time is approximately 2.5 hours, dependent on temperature and substrate.

What is the bed thickness range?

The bed thickness can range from 3mm to 16mm.

What tiles can I use with this adhesive?

It is suitable for ceramic, porcelain, and natural stone tiles.

Can this adhesive be used with underfloor heating?

Yes, its flexible properties make it suitable for use with underfloor heating systems.

Where can I use this adhesive?

It can be used both internally and externally, in wet and dry environments.

How should I store the adhesive?

Store in unopened bags, clear of the ground, and in dry conditions. Avoid frost. Ideal storage temperatures are between 5°C and 25°C.

What is the shelf life?

Under the specified storage conditions, the product has a shelf life of 12 months.

Troubleshooting

Tiles are not adhering properly.

Ensure the surface is properly prepared, clean, and free from dust or loose particles. Check the adhesive mixing ratio and application technique.

Adhesive is setting too quickly.

Check the ambient temperature; higher temperatures can accelerate setting. Work in smaller areas or use cooler water for mixing if necessary.

Tiles are cracking after installation.

Ensure that the substrate is stable and not subject to excessive movement. Make sure movement joints have been incorporated as specified.

Pros and Cons

Pros

Rapid setting allows for quick project completion.
Suitable for a variety of tile types, including natural stone.
Flexible formula is ideal for areas with movement or temperature changes, such as underfloor heating.
Can withstand light foot traffic within hours of installation.
Offers a good pot life for ease of application.
Suitable for use in wet and dry environments.

Cons

Setting time is dependent on temperature and substrate conditions, which may vary.
Requires adherence to British/European standards for tiling and the use of movement joints.
Color variation may occur with raw materials.

Setup, Compatibility & Care

Surface Preparation: Ensure the surface is clean, dry, and free from any loose materials.
Mixing: Mix the adhesive according to the manufacturer's instructions to achieve a consistent consistency.
Application: Apply the adhesive to the substrate using the appropriate notched trowel to achieve the desired bed thickness (3-16mm).
Tile Placement: Carefully place the tiles onto the adhesive, ensuring they are properly aligned and pressed firmly into place.
Grouting: Allow the adhesive to set for the recommended time (2.5 hours) before grouting.

Compatibility: UltraTile ProRapid RS is compatible with various substrates including concrete, sand/cement screed, plywood overlay, and tile backer boards.

Care:

Store the adhesive in unopened bags, clear of the ground, and in dry conditions. Avoid frost.
Ideal storage temperatures are between 5°C and 25°C. The shelf life is 12 months under specified storage conditions.
Always adhere to the correct British/European standards for tiling and incorporate movement joints as specified.