Action Can SA-90 Contact Spray Adhesive - 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Action Can SA-90 Contact Spray Adhesive. It offers a powerful, permanent bond with flexible repositioning, making it ideal for various projects. Be aware that proper ventilation is crucial during application. This guide provides comprehensive instructions for effective use, including setup, application, and troubleshooting.
All features
| Brand | Action Can |
|---|
Extended Product Information
FAQs
What materials can I use this adhesive on?
Action Can SA-90 is suitable for a wide range of materials, including wood, fabric, paper, and some plastics. Always test on a small, inconspicuous area first.
How do I apply the adhesive?
Shake the can well. Hold the can 20-30cm from the surface and apply an even coat. Allow to tack off, then join surfaces.
How long should I wait before joining the surfaces?
Allow the adhesive to tack off for a few minutes after application. The exact time depends on environmental conditions such as temperature and humidity.
What is the coverage area of the can?
The coverage is approximately 3–5m² per can.
How should I store the adhesive?
Store in a cool, dry place away from direct sunlight and heat.
How can I prevent the nozzle from clogging?
Clean the spray nozzle after each use. If clogged, try soaking it in a solvent or replacing the nozzle.
Is the adhesive repositionable?
Yes, it offers flexible repositioning capabilities before the bond sets.
Troubleshooting
Adhesive not sticking properly
Ensure surfaces are clean and dry. Apply an even coat to both surfaces and allow the adhesive to tack off before joining.
Spray nozzle clogging
Clean the nozzle after each use. If clogged, try soaking it in a solvent or replacing the nozzle.
Overspray issues
Use the adjustable spray pattern to minimize overspray. Apply in a well-ventilated area.
Pros and Cons
Pros
- Strong and permanent bond
- Allows for flexible repositioning for accurate placement
- Easy to apply with an adjustable spray pattern
- Non-chlorinated formula
- Suitable for various materials
Cons
- Requires proper ventilation due to aerosol application
- Coverage is limited to approximately 3–5m²
- Bond is permanent, making repositioning difficult after setting
Setup, Compatibility & Care
- Preparation: Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, and oil.
- Application: Shake the can well before use. Hold the can approximately 20-30 cm from the surface and apply an even coat.
- Bonding: Allow the adhesive to tack off for a few minutes, then carefully align and press the surfaces together.
- Compatibility: Suitable for use with a wide range of materials, including wood, fabric, paper, and some plastics. Always test on a small, inconspicuous area first.
- Care: Store in a cool, dry place away from direct sunlight and heat. Clean the spray nozzle after use to prevent clogging.