StarTech.com Wall-Mount Server Rack With Built-in Shelf - 4U
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The StarTech.com WALLSHELF4U is a 4U open-frame wall-mount rack designed for Small Office/Home Office (SoHo) environments, server rooms, or any space with limited area. It offers a key benefit of optimizing workspace by mounting equipment to the wall, freeing up valuable desk or floor space. A potential caveat is its open-frame design, which may not be suitable for environments requiring full dust or security protection. Key features include adjustable mounting depth, a dual-position shelf for non-rackmountable equipment, 10-32 tapped rails for easy installation, and a sturdy steel construction.
All features
| Model Part Number | WALLSHELF4U |
|---|---|
| Brand | StarTech.com |
Extended Product Information
FAQs
What is the maximum weight capacity of the WALLSHELF4U?
The WALLSHELF4U has a maximum weight capacity of 34 kg (75.2 lbs).
Can I mount this rack on a concrete wall?
While designed for standard drywall stud mounting, it can be mounted on concrete with appropriate concrete anchors, ensuring the anchors are rated for the load.
How do I adjust the mounting depth?
The mounting depth is adjustable by loosening the rail screws and sliding the rails within the frame to your desired depth between 12 and 18 inches, then re-tightening the screws.
Does the rack come with cage nuts?
No, the WALLSHELF4U features 10-32 tapped rails, allowing direct mounting of equipment without the need for cage nuts.
What are the dimensions of the shelf?
The integrated shelf is 12 inches deep.
Is this rack suitable for outdoor use?
No, this rack is designed for indoor use only and is not protected against environmental elements like moisture or dust.
What is the warranty period for this product?
The StarTech.com WALLSHELF4U is backed by a lifetime warranty and free lifetime technical support.
Troubleshooting
Rack is wobbly or unstable after mounting.
Ensure the rack is securely fastened into wall studs. Verify that the wall structure is adequate for the total weight. Check that all assembly screws are tightened.
Equipment does not fit the mounting rails.
Confirm that the equipment is standard 19-inch width. Ensure you are using the 10-32 tapped rails correctly. Verify the equipment’s rack height (U) does not exceed the available 4U capacity.
Shelf is not securely attached.
Re-check the shelf mounting screws and ensure they are fully tightened. Confirm the shelf is oriented correctly for the chosen top or bottom position.
Difficulty routing cables through the rear opening.
Ensure cables are not excessively bulky. Consider using cable management accessories like Velcro straps or zip ties before routing them through the opening.
Pros and Cons
Pros
- Optimizes workspace by freeing up desk or floor space.
- Versatile with an adjustable mounting depth and dual-position shelf.
- Simplifies equipment installation with 10-32 tapped rails.
- Durable and secure due to solid steel construction.
- Cost-effective due to flat-pack shipping.
Cons
- Open-frame design offers limited protection against dust and environmental factors.
- Requires careful wall stud identification for secure mounting.
- Cable management features are basic, may require additional accessories for complex setups.
- Weight capacity of 34 kg might be limiting for very heavy equipment.
- Installation requires basic DIY or professional assistance.
Setup, Compatibility & Care
Setup:
- Unpack: Carefully unpack all components from the flat-packed box.
- Assemble Frame: Assemble the main rack frame according to the included manual. Attach the shelf in your desired top or bottom position.
- Determine Location: Choose a suitable wall location, ensuring it can support the weight of the rack and equipment. Identify wall studs using a stud finder, aligning with the 16-inch mounting hole spacing.
- Mount Rack: Securely attach the assembled rack to the wall studs using appropriate hardware (screws are included, but wall anchors may be needed depending on wall type).
- Install Equipment: Mount your rack-mountable equipment onto the 10-32 tapped rails. Place non-rackmountable items on the integrated shelf.
- Cable Management: Route cables through the rear opening and utilize the built-in tie-off points for organization.
Compatibility:
- Rack Units: Compatible with standard 19-inch wide rack-mountable equipment, supporting up to 4U in height.
- Mounting Depth: Adjustable from 12 inches to 18 inches.
- Wall Mounting: Designed for standard US drywall construction with 16-inch on-center stud spacing. Ensure your wall structure is adequate for the load.
- Mounting Holes: Standard 10-32 tapped rails.
- Certifications: RoHS, TAA compliant.
Care:
- Clean the rack with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodically check all mounting screws and connections to ensure they remain tight and secure.
- Ensure adequate ventilation around the mounted equipment to prevent overheating.