Unika water based contact adhesive is ideal for fixing laminate end strip to worktops.
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Unika Worktop Adhesive in White is designed for DIY enthusiasts and professionals seeking a reliable solution for bonding laminate edging to worktops. Its key benefit is a strong, water-based bond that ensures a durable finish. A potential consideration is its specific application; it's optimized for laminate to worktop adhesion, not for general-purpose bonding. The adhesive offers a clean, white finish that blends seamlessly with many worktop designs, providing a secure and aesthetically pleasing join.
| Colour | White |
|---|---|
| Brand | Unika |
This Unika Worktop Adhesive is specifically formulated for bonding laminate edging to worktops. It is not recommended for general use on wood or metal, as adhesion and durability may be compromised.
The adhesive typically becomes tacky within 5-15 minutes, allowing for bonding. Full curing time varies depending on temperature, humidity, and application thickness, but usually takes 24-48 hours for maximum strength.
The adhesive is water-resistant once cured, making it suitable for kitchen and bathroom environments. However, it is not fully waterproof and should not be exposed to prolonged immersion in water.
Uncured adhesive can be wiped away immediately with a damp cloth. Once the adhesive has dried, it is much more difficult to remove and may require careful scraping or abrasion.
When stored correctly in a tightly sealed container in a cool, dry place, the adhesive typically has a shelf life of 12-18 months from the date of purchase.
It is best to clean off any excess uncured adhesive immediately. Once cured, painting over the adhesive is not recommended as it may affect the paint finish and the bond integrity.
Ensure surfaces are clean, dry, and appropriately prepared (e.g., lightly abraded if smooth). Verify the adhesive has been allowed to become tacky before joining surfaces. Check adhesive age; old adhesive may lose tackiness.
Reapply adhesive, ensuring even coverage and sufficient pressure during bonding. Allow adequate curing time. Ensure the worktop substrate is stable and not prone to moisture swelling.
Clean any uncured adhesive immediately with a damp cloth. If cured, gentle abrasion might remove minor residue, but caution is advised to avoid damaging the worktop finish.
Ensure the adhesive has not dried out in the container. Stir thoroughly. If significantly dried, it may be unusable. Check storage conditions; extreme cold can thicken water-based adhesives, but they should return to normal consistency when warmed.
Setup:
Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, or any other contaminants. For best results, lightly abrade smooth surfaces before application. Apply the adhesive evenly to one surface using a brush or trowel. Allow to become tacky (usually 5-15 minutes, depending on conditions) before joining the surfaces together under firm pressure.
Compatibility:
This adhesive is specifically designed for bonding laminate edging strips to composite or chipboard worktops. It is also suitable for joining pieces of laminate edging together. It is not recommended for use on porous surfaces like bare wood or for applications requiring submersion in water.
Care:
Clean any excess uncured adhesive immediately with a damp cloth. Once cured, the adhesive is water-resistant but not waterproof. Store the adhesive in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lid is tightly sealed to prevent drying out.
