Morphy Richards Mrxcompletepro Wet And Dry Hard Floor Cleaner - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Morphy Richards Mrxcompletepro Wet and Dry Hard Floor Cleaner is designed for homeowners seeking an efficient and convenient way to clean hard floors. Its key benefit is the ability to wash and dry simultaneously, saving time and effort. A potential caveat is the charging time required for its cordless operation. This innovative cleaner tackles spills, dirt, and grime on various hard surfaces, featuring multiple speed settings and a self-cleaning function for maintenance.
All features
| Colour | Black |
|---|---|
| Model Part Number | 5056765403131 |
| Brand | Morphy Richards |
Extended Product Information
FAQs
How long does the battery last on a full charge?
The running time varies between 20 to 30 minutes depending on the selected speed mode.
What surfaces can I use this cleaner on?
It is designed for use on various hard floor surfaces such as tile, sealed wood, laminate, and linoleum.
How often should I empty the dirty water tank?
You should empty the dirty water tank whenever it is full or after each cleaning session to maintain optimal performance and hygiene.
Can I use any floor cleaning solution?
It is recommended to use only water or a small amount of approved floor cleaner as specified in the user manual. Using incorrect solutions can damage the unit.
What is the charging time for the Mrxcompletepro?
The cleaner requires approximately 4 to 6 hours for a full charge.
How does the self-cleaning function work?
The self-cleaning function automatically cleans the brush roll and internal pathways. You activate it after each use, typically while the unit is on its charging base, ensuring it's ready for the next cleaning.
What is the warranty period for this product?
The Morphy Richards Mrxcompletepro comes with a 2-year guarantee.
Troubleshooting
Cleaner not turning on
Ensure the battery is charged. Check that the clean water tank is correctly inserted. Verify the power switch is in the 'on' position.
Poor cleaning performance
Check if the dirty water tank is full and empty it. Ensure the clean water tank is adequately filled. Clean the brush roll and check for any blockages in the suction path.
Water leaking from the unit
Verify that both the clean and dirty water tanks are securely attached. Inspect the tanks and seals for any damage. Ensure the cleaner is stored upright.
Self-cleaning function not working
Make sure there is enough clean water in the tank. Ensure the dirty water tank is empty and correctly installed. Refer to the user manual for specific self-cleaning activation steps.
Unit stops mid-use
The battery may be low; connect to the charger. The unit might have overheated; allow it to cool down. Check if the dirty water tank is full, which can trigger a shut-off mechanism.
Pros and Cons
Pros
- Combines washing and drying for efficient cleaning.
- Suitable for a wide range of hard floor surfaces.
- Cordless design offers excellent maneuverability.
- Self-cleaning function simplifies maintenance.
- User-friendly LED display for clear status information.
- Lightweight and self-propelled for reduced user effort.
Cons
- Requires a charging time of 4-6 hours.
- Running time of 20-30 minutes may be insufficient for very large areas.
- Dirty water tank capacity is relatively small (400ml).
- Best suited for hard floors; not for carpets or rugs.
- Requires regular emptying and refilling of tanks.
Setup, Compatibility & Care
Setup:
- Ensure the cleaner is fully charged before first use (approximately 4-6 hours).
- Fill the clean water tank with clean water. For tougher messes, a small amount of approved floor cleaner can be added as per manufacturer instructions (check your manual for specific recommendations).
- Attach the clean water tank securely to the unit.
- Empty the dirty water tank if it has been used previously.
Compatibility:
- Safe for: Tile, sealed wood, laminate, linoleum, and other sealed hard floor surfaces.
- Not suitable for: Carpet, rugs, unfinished wood, or unsealed surfaces.
Care:
- After each use: Empty the dirty water tank and rinse it thoroughly. Rinse the clean water tank.
- Self-Cleaning: Utilize the self-cleaning function after each use to clean the brush roll and internal components. Ensure the machine is placed on its charging base or a stable surface during this process.
- Brush Roll: Remove and rinse the brush roll periodically, allowing it to air dry completely before reinserting.
- Storage: Store the cleaner upright in a cool, dry place. Ensure it is fully charged or disconnected from the charger as per instructions if storing for extended periods.
- Exterior: Wipe down the exterior of the cleaner with a soft, damp cloth. Avoid using abrasive cleaners.