Carlube Copper Grease - Brake Pad Anti-Seize - 500g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Carlube Copper Grease is a high-performance, lead-free anti-seize compound for professionals and DIY enthusiasts needing to ensure easy release of threaded components, even after prolonged exposure to harsh conditions. Its key benefit is preventing galling and seizure at extreme temperatures, but users should exercise caution to avoid application to friction materials or the electrical system. This product is based on a non-melting grease with heat-resistant solids and low shear metals, suitable for a wide range of automotive applications.
All features
| Model Part Number | XCG500 |
|---|---|
| Brand | Carlube |
Extended Product Information
FAQs
Can Carlube Copper Grease be used on all metals?
Yes, it is generally suitable for most common automotive metals like steel and aluminum. However, always test on an inconspicuous area if unsure, and avoid use on sensitive electronic components.
How much copper grease should I use?
A thin, even layer is usually sufficient. Over-application can lead to excess grease migrating to unwanted areas, such as friction surfaces.
Is this product safe for wheel nuts?
Yes, applying it to wheel stud threads ensures they can be properly torqued and later removed without damage or seizure.
What is the primary benefit of using this product?
Its primary benefit is preventing components from seizing or galling, especially under high temperatures and corrosive conditions, thereby easing both assembly and future disassembly.
Can I use this on spark plug threads?
Yes, it is recommended for spark plug threads to ensure they can be easily removed during future servicing without damaging the cylinder head.
Where should I absolutely NOT apply copper grease?
Never apply copper grease to the friction material of brake pads, brake discs, or any part of the electrical system. It can also contaminate surfaces where a dry friction interface is required.
How should I store the product?
Store the container tightly sealed in a cool, dry place, away from direct sunlight and extreme temperatures, to maintain its consistency and effectiveness.
Troubleshooting
Difficulty dispensing grease
Ensure the container lid is fully open and the product has not become excessively hardened. If hardened, gentle warming might help, but avoid overheating.
Brake squeal persists after application
Verify that the grease was applied correctly to the *back* of the brake pads and shims, not the friction material or rotor. Ensure the correct type and amount of grease was used, and check for other potential causes of squeal.
Components still seized after application
Ensure the grease was applied before assembly and allowed to work. For extremely corroded or high-torque applications, additional mechanical force may be required, but always proceed with caution.
Pros and Cons
Pros
- Provides excellent corrosion resistance.
- Significantly eases the dismantling of parts.
- Facilitates easier and more positive initial assembly.
- Effective in preventing galling and seizure at extreme temperatures.
- Suitable for a wide range of automotive applications.
- Lead-free formulation.
Cons
- Requires careful application to avoid contact with friction surfaces.
- Potential for mess if not applied judiciously.
- Not suitable for application to electrical systems.
- May require cleaning of tools after use.
Setup, Compatibility & Care
Setup:
- Ensure the surfaces to be treated are clean, dry, and free from dirt, rust, and old grease.
- Apply a thin, even layer of Carlube Copper Grease to the threads of bolts, nuts, or the contact points as recommended for the specific application.
- For brake pads, apply only to the backplate and shims; never apply to the friction material or the disc rotor.
Compatibility:
- Suitable for use on most metal components, including steel, aluminum, and brass.
- Not recommended for use on electrical connections or high-speed bearings where specialized greases are required.
- Ensure compatibility with any existing lubricants or sealants before application.
Care:
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Keep the container tightly sealed when not in use to prevent contamination and drying out.
- Clean up any excess grease promptly with a rag and appropriate solvent. Dispose of used rags responsibly.
- Wash hands thoroughly after use.