Diamond Dotz Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Diamond Dotz Adhesive is for crafters looking to permanently attach Diamond Dotz stones to various surfaces. Its key benefit is strong adhesion on materials like wood, glass, metal, and fabric, allowing for detailed individual decoration. A caveat is the drying time required before stones can be applied, and the need to protect the wet adhesive from dust.
All features
| Colour | White |
|---|---|
| Model Part Number | DDA.032 |
| Brand | Diamond Dotz |
Extended Product Information
FAQs
What surfaces can I use this adhesive on?
This adhesive is suitable for use on wood, glass, metals, and fabrics.
How thick should I apply the adhesive?
Apply an approximate 3 mm thick layer of the milky white glue.
How do I know when the adhesive is dry?
The adhesive starts as a milky white liquid and dries completely clear. You can start pressing the Dotz once it has dried clear.
Can I use this for Diamond Dotz kits?
This adhesive is specifically designed for the Diamond Dotz Freestyle range and individual decoration. It may not be suitable as a replacement for pre-applied adhesive on standard kits.
How should I store the adhesive?
Store the bottle in a cool, dry place with the cap tightly closed to prevent it from drying out.
What happens if dust gets on the wet adhesive?
Dust can compromise the bond. It's recommended to cover the dried adhesive layer with a separately available protective film to protect it from dust while it dries.
Is the adhesive permanent?
Yes, once dried, the adhesive creates a permanent bond for your Diamond Dotz stones.
Troubleshooting
Adhesive is not sticking well
Ensure the surface was clean and completely dry before application. Apply the adhesive in the recommended 3 mm thickness and allow it to dry fully clear before placing Dotz.
Dotz are falling off after drying
The adhesive may not have been fully dried before Dotz were applied, or the adhesive layer was too thin. Reapply adhesive to affected areas and allow proper drying time.
Adhesive is still milky white after a long time
The adhesive layer might be too thick, or the drying conditions are not optimal. Ensure adequate airflow and avoid excessively humid environments. Try applying a slightly thinner layer next time.
Dust or debris in the adhesive
Use a protective film over the wet adhesive area to prevent dust contamination. If minor debris is present, carefully remove it while the adhesive is still wet, if possible, or work around it.
Pros and Cons
Pros
- Strong and durable adhesion on multiple surfaces.
- Dries clear, preserving the visual integrity of crafts.
- Versatile for various creative projects.
- Sufficient quantity for detailed work.
Cons
- Requires adequate drying time before applying Dotz.
- Wet adhesive needs protection from dust.
- Specific application thickness (approx. 3mm) recommended for best results.
Setup, Compatibility & Care
Setup: Ensure the surface you intend to decorate is clean and dry. Apply the Diamond Dotz Adhesive in an approximately 3 mm thick layer using the bottle's applicator. Allow the adhesive to dry completely until it becomes clear.
Compatibility: This adhesive is suitable for use on wood, glass, metals, and fabrics. It is designed specifically for use with Diamond Dotz stones.
Care: Store the bottle in a cool, dry place away from direct sunlight. Keep the cap tightly closed when not in use to prevent the adhesive from drying out. If the nozzle becomes clogged, gently clean it with a damp cloth. To protect applied Dotz and the adhesive from dust during application, use a separately available protective film over the wet adhesive area.